Features:
•
•
•
•
•
•
•
•
High Efficiency
Low ripple & noise
Overvoltage protecꢀon
Overcurrent protecꢀon
Over-temperature protecꢀon
100% burn-in at full rated load
Standby consumpꢀon less than 0.5W
Compliant with CEC and ENERGY STAR efficiency level V
requirements
•
•
Compliant with RoHS requirements
IEC 60601-1-2-4th Ediꢀon EMC Compliance
Descripꢀon:
The PMP220 series of AC/DC switching power supplies are for 200-220 waꢁs of conꢀnuous output power. They are enclosed
in a 94V-0 rated polycarbonate case with an inlet to mate with interchangeable cord for world-wide use. All models meet
EN55011 and FCC class B emission limits, and are designed for medical applicaꢀons.
Model1
Output
Average Acꢀve
Efficiency
(typical)
@115/230 Vac
Ripple &
Noise 4
Class I1
Class II2
V1
Min Current3
Max. Current
Tol.
Max Power
PMP220-13-2 PMP220SF-13-2
19V
0.1A
10.53A
9.17A
190mV
240mV
200W
87/87%
90/92%
±5%
PMP220-14
PMP220-15
PMP220SF-14
24V
0.1A
220W
±5%
PMP220SF-15
PMP220SF-17
28V
36V
0.1A
0.1A
7.86A
6.11A
280mV
360mV
220W
220W
90/92%
90/92%
±5%
±5%
PMP220-17
NOTES:
1. Class I models are equipped with IEC320/C14 inlet. To order a model with C6 inlet, add “S” to the prefix, PMP220, of
model number, e.g. PMP220S-12.
2. Class II models are equipped with IEC320/C8 inlet. To order a model with C18 inlet, change “SF” in the prefix of model
number to “F”, e.g. PMP220F-12.
3. All models may be operated at no-load without damage. At no load, output voltage fluctuates beyond 5% due to the
burst-mode operaꢀon of the control IC in them for energy saving.
4. Ripple and noise is maximum peak to peak voltage value measured at output within 20 MHz bandwidth, at rated line
voltage and output load ranges, and with a 47 μF electrolyꢀc capacitor in parallel with a 0.1 μF ceramic capacitor across
the output.
TT Electronics | Power Partners, Inc
General Note
43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600
All data sheets are subject to change without noꢀce.
ISS.2 20/07/2020 Page: 1
© TT Electronics plc