Features:
•
•
•
•
•
•
•
•
Low safety ground leakage current
Wide input range 90 to 264 VAC
Opꢀonal output connectors
100% burn-in at full load
Overvoltage protecꢀon
Over-temperature protecꢀon
Overcurrent protecꢀon
Compliant with CEC and Energy Star Efficiency
Level V requirements
* No load power consumpꢀon less than 0.5W
* Average acꢀve efficiency greater than 87%
Compliant with RoHs requirements
IEC 60601-2-4th Ediꢀon EMC Compliant
•
•
Descripꢀon:
The PMP105 series of AC/DC switching power supplies are for 90-105 waꢁs of conꢀnuous output power. They are enclosed
in a 94V-0 rated polyphenylene-oxide case with an IEC320/C14, C6, C18 or C8 inlet to mate with interchangeable cord for
world-wide use. All models meet EN55011 and FCC class B emission limits, and are designed for medical applicaꢀons.
Model (1)
Output
Average Acꢀve
Efficiency
(typical)
@115/230 Vac
Peak
Ripple &
Noise4
Max
Power
Class I (1)
PMP105-12
Class II (2)
V1
Imin.
Imax.
Tol
Current3
PMP105SF-12
12V
13V
0A
0A
0A
0A
0A
0A
0A
0A
0A
0A
7.5A
15A
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
120mV
130mV
150mV
180mV
200mV
240mV
280mV
300mV
360mV
480mV
90W
90W
87/87%
87/87%
87/88%
88/89%
88/89%
88/89%
88/89%
88/89%
89/90%
90/91%
PMP105-12-1 PMP105SF-12-1
PMP105-13 PMP105SF-13
6.93A
6.79A
5.84A
5.25A
4.38A
3.75A
3.50A
2.92A
2.29A
13.8A
13.58A
11.6A
10.5A
8.7A
14-16V
95W
PMP105-13-1 PMP105SF-13-1 18-19V
PMP105-13-3 PMP105SF-13-3 20-21V
105W
105W
105W
105W
105W
105W
105W
PMP105-14
PMP105-15
PMP105-16
PMP105-17
PMP105SF-14
PMP105SF-15
PMP105SF-16
PMP105SF-17
PMP105SF-18
24-25V
28-29V
30-32V
36-38V
46-50V
4.5A
4.2A
3.5A
PMP105-18
2.7A
NOTES:
1. Class I models are equipped with IEC320/C14 inlet. To order a model with C6 inlet, add “S” to the prefix, PMP105, of model number,
e.g. PMP105S-12.
2. Class II models are equipped with IEC320/C8 inlet. To order a model with C18 inlet, change “SF” in the prefix of model number to
“F”, e.g. PMP105F-12.
3. For 10 seconds maximum, average power not to exceed maximum power raꢀng.
4. Ripple and noise is maximum peak to peak voltage value measured at output within 20 MHz bandwidth, at rated line voltage and
output load ranges, and with a 10 μF tantalum capacitor in parallel with a 0.1 μF ceramic capacitor across the output.
General Note
TT Electronics | Power Partners, Inc
All data sheets are subject to change without noꢀce.
43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600
ISS.2 14/07/2020 Page: 1
© TT Electronics plc