SMT Power Inductors
High Current Composite Inductor - PA5002.XXXNLT and PM2202.XXXNLT
POWER PRODUCTS
Height: 2.0mm Max
I
A
9
4
T
9
F
Footprint: 5.7mm x 5.5mm Max
Current Rating: up to 30Apk
Inductance Range: 0.15uH to 1.5uH
High current, low DCR, and high efficiency
High reliability
Minimized acoustic noise and minimized leakage flux noise
Available in Commercial (PA5002) and Automotive
(PM2202) grades
Electrical Specifications @ 25°C, Operating Temperature Range -55°C to +155°C
Rated3
Current
Saturation2
Current
Part Number
DC Resistance
Inductance
100KHz, 0.1V
K Factor
for
Core Loss
T Y P.
mΩ
4
MAX.
mΩ
4.6
Commerical
Automotive6
uH 20ꢀ
0.15
0.16
0.33
0.47
0.56
0.68
0.8
A
A
27
PA5002.151NLT
PA5002.161NLT
PA5002.331NLT
PA5002.471NLT
PA5002.561NLT
PA5002.681NLT
PA5002.801NLT
PA5002.821NLT
PA5002.102NLT
PA5002.122NLT
PA5002.152NLT
PM2202.151NLT
PM2202.161NLT
PM2202.331NLT
PM2202.471NLT
PM2202.561NLT
PM2202.681NLT
PM2202.801NLT
PM2202.821NLT
PM2202.102NLT
PM2202.122NLT
PM2202.152NLT
18.8
18.8
14.4
14.1
13.9
13.4
13
458.5
-
4
4.6
27
6.1
7
7
24
291.7
213.9
213.9
168.9
168.9
168.9
139.5
118.9
118.9
8.05
9.54
10.2
11.8
12.7
13.8
16.3
18.7
20
8.7
8.9
10.3
11
16
14
13.5
13
0.82
1
12
10.5
9.4
8.8
12
12.8
12.2
11.7
1.2
14.2
16.2
1.5
Notes:
1. Actual temperature of the component during system operation (ambient plus
temperature rise) must be within the standard operating range.
other cooling provisions all affect the part temperature. Part temperature should be
verified in the end application.
2. The saturation current is the current at which the initial inductance is guaranteed
to drop by no more than 40%. The typical inductance at a specified current can be
found on the typical performance curves.
5. Parts shown in bold are standard catalog parts and are available through sample
stock and distribution. Parts in lighter font are available but are not necessarily held
in sample stock or distribution and lead times may be longer. Please contact Pulse
for availablity.
3. The rated current is the DC current required to raise the component temperature by
approximately 40�C. Take note that the components’ performanc varies depending 6. The PM2202.XXXNLT part numbers are AEC-Q200 and IATF16949 certified. The
on the system condition. It is suggested that the component be tested at the system
level, to verify the temperature rise of the component during system operation.
4. The part temperature (ambient+temp rise) should not exceed 155�C under worst
case operating conditions. Circuit design, PCB trace size and thickness, airflow and
mechanical dimensions are 100% tested in production but do not necessarily meet a
product capability index (Cpk) >1.33 and therefore may not strictly conform to PPAP.
7. Special Characteristics
Power.PulseElectronics.com
P807. E (07/20)
1
5秒后页面跳转
全球首块英伟达H200交付 黄仁勋“送货上门”
常用8脚开关电源芯片型号大全
74HC04芯片引脚图及功能、应用电路图讲解
CR6842芯片参数、引脚配置、应用电路图详解
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
