SMT Power Inductors
High Current Composite Inductor - PA5003.XXXNLT and PM2203.XXXNLT
Height: 3.1mm Max
Footprint: 5.7mm x 5.5mm Max
I
A
9
4
T
9
F
Current Rating: up to 36Apk
Inductance Range: 0.15uH to 4.7uH
High current, low DCR, and high efficiency
High reliability
Minimized acoustic noise and minimized leakage flux noise
Available in Commercial (PA5003) and Automotive
(PM2203) grades
Electrical Specifications @ 25°C, Operating Temperature Range -55°C to 155°C
Part Number
DC Resistance
Inductance
100KHz, 0.1V
Rated3
Current
Saturation2
Current
K Factor
for
Core Loss
T Y P.
mΩ
2.10
MAX.
mΩ
2.31
Commerical
Automotive6
uH 20ꢀ
0.15
0.16
0.33
0.47
0.56
0.6
A
A
PA5003.151NLT
PA5003.161NLT
PA5003.331NLT
PA5003.471NLT
PA5003.561NLT
PA5003.601NLT
PA5003.801NLT
PA5003.821NLT
PA5003.102NLT
PA5003.122NLT
PA5003.152NLT
PA5003.182NLT
PA5003.222NLT
PA5003.332NLT
PA5003.472NLT
PM2203.151NLT
PM2203.161NLT
PM2203.331NLT
PM2203.471NLT
PM2203.561NLT
PM2203.601NLT
PM2203.801NLT
PM2203.821NLT
PM2203.102NLT
PM2203.122NLT
PM2203.152NLT
PM2203.182NLT
PM2203.222NLT
PM2203.332NLT
PM2203.472NLT
22.2
22.2
19.2
18.4
17.7
17.7
13.1
12.9
12.2
11
32.5
32.0
26.0
24.0
20.2
20.0
18.0
17.6
14.3
13.5
12.5
11.3
9.0
458.5
458.5
291.7
213.9
213.9
213.9
168.9
168.9
139.5
118.9
103.5
103.5
91.7
2.12
2.33
3.52
3.20
3.75
4.13
4.05
4.11
4.52
4.52
5.65
5.78
0.8
5.14
0.82
1.0
5.25
6.90
8.80
10.10
11.50
13.20
21.00
7.60
9.70
11.20
12.70
14.50
23.10
36.30
1.2
1.5
10.5
10.1
9.7
1.8
2.2
3.3
8.1
8.7
74.6
4.7
5.9
33.00
7.0
58.3
Notes:
1. Actual temperature of the component during system operation (ambient plus
temperature rise) must be within the standard operating range.
other cooling provisions all affect the part temperature. Part temperature should be
verified in the end application.
2. The saturation current is the current at which the initial inductance is guaranteed
to drop by no more than 40%. The typical inductance at a specified current can be
found on the typical performance curves.
5. Parts shown in bold are standard catalog parts and are available through sample
stock and distribution. Parts in lighter font are available but are not necessarily held
in sample stock or distribution and lead times may be longer. Please contact Pulse
for availablity.
3. The rated current is the DC current required to raise the component temperature by
approximately 40�C. Take note that the components’ performanc varies depending 6. The PM2203.XXXNLT part numbers are AEC-Q200 and IATF16949 certified. The
on the system condition. It is suggested that the component be tested at the system
level, to verify the temperature rise of the component during system operation.
4. The part temperature (ambient+temp rise) should not exceed 155�C under worst
case operating conditions. Circuit design, PCB trace size and thickness, airflow and
Inductance and mechanical dimensions are 100% tested in production but do not
necessarily meet a product capability index (Cpk) >1.33 and therefore may not
strictly conform to PPAP.
7. Special Characteristics
Power.PulseElectronics.com
1
P808.D (01/21)