Features:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
BF Class insulaꢀon
Operaꢀon alꢀtude up to 5000 meters
Suitable for both Class I and Class II applicaꢀons*
2 x 4 inch foot print with 1.3 inch low proꢂle
Less than 2 75 μA leakage current
W ide input range 80 -264 VAC
Meet EN55011 /55022 and FCC Class B
Power Factor 0.98 typical
100% burn -in at full load
Short -circuit protecꢀon
Over-temperature protecꢀon
Power Fail Detect (PFD) signal (opꢀonal)
Compliant with RoHS requirements
No load power consumpꢀon less than 0. 5W without PFD or 1W
with PFD
Descripꢀon:
The PM150 series of AC-DC switching power supplies in a package of 2 x 4 x 1.3 inches are capable of delivering 100-150
waꢁs of conꢀnuous power at 7.5 CFM forced air cooling or 100 waꢁs at convecꢀon cooling. The units are constructed on a
printed circuit board. They are specially designed for medical applicaꢀons. The units are cerꢀꢂed also to IEC /EN /UL /CSA
60950-1 and suitable for data networking, industrial and telecommunicaꢀon applicaꢀons.
Model1
Class II
Output
Max. Current Max. Current
Peak2
Efficiency
(typical)
@115/230
Vac
Min.
Load
Ripple &
Noise4
Max. Output
Power3
V1
Tol.
±2%
±2%
±2%
±2%
±2%
±2%
±2%
at convecꢀon
at 7.5 CFM
Current
PM150-12A
PM150-13A
PM150-13-1A
PM150-14A
PM150-16A
PM150-17A
12V
15V
18V
24V
30V
36V
48V
0A
0A
0A
0A
0A
0A
0A
8.35A
12.5A
14A
120mV
150mV
180mV
240mV
300mV
360mV
480mV
100W/150W
100W/150W
100W/150W
100W/150W
100W/150W
100W/150W
100W/150W
90/92%
89/91%
91/92%
89/92%
89/92%
90/92%
89/92%
6.70A
5.56A
4.20A
3.34A
2.78A
2.10A
10A
8.34A
6.25A
5A
11A
9.2A
7A
5.6A
4.6A
3.5A
4.17A
3.13A
PM150-18A
NOTES:
1. To order a model with PFD signal, please consult factory to get an exclusive part number disꢀnguishing it from the standard model without PFD
signal.
2. Peak output current with 10% duty cycle maximum for less than 15 seconds, average power not to exceed maximum power raꢀng.
3. The ꢂrst value of max. power is at convecꢀon cooling. The second value is with 7.5 CFM forced air provided by user.
4. Ripple and noise is maximum peak to peak voltage value measured at output within 20 MHz bandwidth, at rated line voltage and output load ranges,
and with a 10 μF tantalum (or electrolyꢀc) capacitor in parallel with a 0.1 μF ceramic capacitor across the output except model PM150-12A which is
with a 47 μF tantalum (or electrolyꢀc) capacitor in parallel with a 0.1 μF ceramic capacitor across the output.
TT Electronics | Power Partners, Inc
General Note
43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600
All data sheets are subject to change without noꢀce.
SL-xxx-xxx ISS.6 22/07/2020 Page: 1
© TT Electronics plc