Datasheet > PLG0J152MDO1

PLG0J152MDO1

更新时间： 2024-11-09 13:46:15

品牌	Logo	应用领域
尼吉康 - NICHICON		/
页数	文件大小	规格书
2页	59K
描述
PLG

阅读下载

中文翻译

获取价格

数据手册
替代型号

如果您发现信息不准确，欢迎纠错

PLG0J152MDO1 数据手册

CONDUCTIVE POLYMER

ALUMINUM SOLID ELECTROLYTIC CAPACITORS

Radial Lead Type, Higher Capacitance

series

Higher Capacitance, Low ESR, High ripple current.

Load life of 2000 hours at 105°C.

Higher

Capacitance

Radial lead type :

Lead free flow soldering condition correspondence

Adapted to the RoHS directive 2002/95/EC .

(

)

Specifications

Item

Performance Characteristics

Category Temperature Range –55 to +105°C

Rated Voltage Range

Rated Capacitance Range

Capacitance Tolerance

tan δ

2.5 to 16V

330 to 3900µF

± 20% at 120Hz, 20°C

Not more than value of Standard ratings at 120Hz, 20°C

(

)

ESR

Not more than value of Standard ratings at 100kHz, 20°C

(

)

Leakage Current

Not more than value of Standard ratings. After 2 minute's application of rated voltage. 20°C

(

)

Characteristics of Temperature Z+105°C / Z+20°C 1.25

100kHz

Impedance Ratio

Z-55°C / Z+20°C 1.25

(

)

Capacitance change Within ± 20% of initial value

After 2000 hours' application of rated voltage

at 105°C, capacitors meet the specified value

for life characteristics listed at right.

tan δ

150% or less of the initial specified value

Initial specified value or less

Endurance

(

)

ESR

(

)

Leakage current

(

)

Capacitance change Within ± 20% of initial value

After 1000 hours' application of rated voltage

at 60°C 90%RH, capacitors meet the specified

value for life characteristics listed at right.

tan δ

150% or less of the initial specified value

Initial specified value or less

Damp Heat

(

)

ESR

(

)

Leakage current

To comply with recommended conditions for

reflow soldering. Pre-heating shall be done

at 150 to 200°C and for 60 to 180 sec.

Peak temp. is 265°C, within 10 sec.

Measurement for solder temperature profile

shall be made at a point on the terminal

nearest where the terminals protrude through

the soldering side of PC board.

(

)

Capacitance change Within ± 10% of initial value

tan δ

130% or less of the initial specified value

Initial specified value or less

Resistance to

Soldering Heat

(

)

ESR

(

)

Leakage current

Marking

Navy blue print on the case top.

(

)

ESR measurements should be made at a point on the terminal nearest the end seal of the capacitor.

Conditioning : If there is doubt about the measured result, measurement should be made again after the rated voltage is applied for 120 minutes

at the temperature of 105°C.

(

)

Initial value : The value before test of examination of resistance to soldering.

中文翻译

下载PDF

PLG0J152MDO1 替代型号

型号	品牌	替代类型	描述	数据表
6SEPC1500M+T	PANASONIC	功能相似	SEPC
6SEPC1500M+C3	PANASONIC	功能相似	SEPC

与PLG0J152MDO1相关器件

型号	品牌	获取价格	描述	数据表
PLG0J182MDO1	NICHICON	获取价格	CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS
PLG0J821MCO1	NICHICON	获取价格	CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS
PLG10-8000	NIDEC	获取价格	STEPPING ACTUATORS
PLG1A122MDO1	NICHICON	获取价格	CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS
PLG1A561MCO1	NICHICON	获取价格	CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS
PLG1A821MDO1	NICHICON	获取价格	CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS
PLG1C331MCO1	NICHICON	获取价格	CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS
PLG1C471MDO1	NICHICON	获取价格	CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS
PLG1C821MDO1	NICHICON	获取价格	CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS
PLG20-1000	NIDEC	获取价格	STEPPING MOTORS

与PLG0J152MDO1相关文章

英伟达新AI芯片Rubin或提前半年亮相
2024-11-05

21
苹果iPhone 17将全系采用三星/LG显示LTPO OLED面板
2024-11-05

19
三星深化印度制造布局，供应链本地化进程加速
2024-10-29

44
芯擎科技“星辰一号”自动驾驶芯片点亮成功，2025年量产在即
2024-10-29

38

产品中心

服务支持

精选活动

关于我们

帮助中心

PLG0J152MDO1

PLG0J152MDO1 数据手册

PLG0J152MDO1 替代型号

与PLG0J152MDO1相关器件

与PLG0J152MDO1相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

PLG0J152MDO1

PLG0J152MDO1 数据手册

PLG0J152MDO1 替代型号

与PLG0J152MDO1相关器件

与PLG0J152MDO1相关文章

您还可以找

您在本页遇到什么问题？