PIC24HJXXXGPX06A/X08A/X10A
16-bit Microcontrollers (up to 256 KB Flash and
16 KB SRAM) with Advanced Analog
Operating Conditions
Communication Interfaces
• Two UART modules (10 Mbps)
- With support for LIN 2.0 protocols and IrDA®
• 3.0V to 3.6V, -40ºC to +150ºC, DC to 20 MIPS
• 3.0V to 3.6V, -40ºC to +125ºC, DC to 40 MIPS
• Two 4-wire SPI modules (15 Mbps)
• Up to two I2C™ modules (up to 1 Mbaud) with
SMBus support
Core: 16-bit PIC24H CPU
• Code-efficient (C and Assembly) architecture
• Up to two Enhanced CAN (ECAN) modules
(1 Mbaud) with 2.0B support
• Single-cycle mixed-sign MUL plus hardware divide
• Data Converter Interface (DCI) module with I2S
codec support
Clock Management
• ±2% internal oscillator
• Programmable PLLs and oscillator clock sources
• Fail-Safe Clock Monitor (FSCM)
• Independent Watchdog Timer (WDT)
• Fast wake-up and start-up
Input/Output
• Sink/Source up to 10 mA (pin specific) for stan-
dard VOH/VOL, up to 16 mA (pin specific) for non-
standard VOH1
• 5V-tolerant pins
Power Management
• Selectable open drain, pull-ups, and pull-downs
• Up to 5 mA overvoltage clamp current
• External interrupts on all I/O pins
• Low-power management modes (Sleep, Idle,
Doze)
• Integrated Power-on Reset and Brown-out Reset
• 1.35 mA/MHz dynamic current (typical)
• 55 μA IPD current (typical)
Qualification and Class B Support
• AEC-Q100 REVG (Grade 1 -40ºC to +125ºC)
• AEC-Q100 REVG (Grade 0 -40ºC to +150ºC)
• Class B Safety Library, IEC 60730
Advanced Analog Features
• Two ADC modules:
- Configurable as 10-bit, 1.1 Msps with four
S&H or 12-bit, 500 ksps with one S&H
Debugger Development Support
• In-circuit and in-application programming
• Two program and two complex data breakpoints
• IEEE 1149.2-compatible (JTAG) boundary scan
• Trace and run-time watch
- 18 analog inputs on 64-pin devices and up to
32 analog inputs on 100-pin devices
• Flexible and independent ADC trigger sources
Timers/Output Compare/Input Capture
• Up to nine 16-bit timers/counters. Can pair up to
make four 32-bit timers.
• Eight Output Compare modules configurable as
timers/counters
• Eight Input Capture modules
Packages
Type
QFN
TQFP
TQFP
TQFP
Pin Count
Contact Lead/Pitch
I/O Pins
64
0.50
64
0.50
100
0.50
100
0.40
53
53
85
85
Dimensions
9x9x0.9
10x10x1
12x12x1
14x14x1
Note: All dimensions are in millimeters (mm) unless specified.
2009-2012 Microchip Technology Inc.
DS70592D-page 1