Cool-Power®
48 Volt
48 VIN and 3.3 - 18 VOUT, Cool-Power ZVS Isolated DC-DC Converter Modules
Product Description
Features
• Efficiency up to 89%
The Cool-Power ZVS Isolated Converter Module Series
consists of high density isolated DC-DC converters
implementing Zero Voltage Switching topology.
• High switching frequency minimizes input filter
requirements and reduces output capacitance
• Proprietary “Double-Clamped” ZVS Buck-Boost Topology
• Proprietary isolated magnetic feedback
• Small footprint (0.57 in2) enables PCB area savings
• Very low profile (0.265 in)
The 48 Vin Cool-Power series operates over a wide input
range of 36 V to 75 V with 3.3 V and 12 V output models and a
narrower range of 41 V to 57 V at 18 V output for PoE and
other applications. Both model sets produce 60W of output
power, yeilding an unprecedented power density of 400
W/in3.
• On/Off Control, positive logic
• Wide trim range +10/-20%
• Temperature Monitor (TM) &
Output Voltage
Device
IOUT Max
Over-Temperature Protection (OTP)
Set
Range
• Input UVLO & OVLO and output OVP
• Over current protection with auto restart
• Adjustable soft-start
3.3 V
18 A
PI3101-00-HVIZ
PI3105-00-HVIZ
PI3110-01-HVIZ
2.97 to 3.63 V
12 V
18 V
5 A
9.6 to 13.2 V
16.2 to 19.8 V
3.3 A
• 2250 Vdc input to output isolation
• Surface Mountable 0.87” x 0.65” x 0.265” package
These converter modules are surface mountable and only
~.5" square in area achieving ~50% space reduction versus
conventional solutions.
Applications
A switching frequency of 900 kHz allows for small input and
output filter components which further reduces the total size
and cost of the overall system solution. The output voltage is
sensed and fed back to the internal controller using a
proprietary isolated magnetic feedback scheme which allows
for high bandwidth and good common mode noise immunity.
• Space Constrained Systems
• Isolated Board Level Power
• Network Power Systems
• Telecommunications
The 48 Volt PI31xx series requires no external feedback
compensation and offers a total solution with a minimum
number of external components. A rich feature set is offered,
including output voltage trim capability, output over-voltage
protection, adjustable soꢀ-start, over-current protection with
auto-restart, over and under input voltage lockout and a
temperature monitoring and protection function that
provides an analog voltage proportional to the die
• Distributed Power Architecture
• PoE-Power Over Ethernet
• IPoL - Isolated Point of Load Power
Package Information
• Surface Mountable 0.87” x 0.65” x 0.265” package
• Weight = 7.8 grams
temperature as shut down and alarm capabilities.
®
Cool-Power
Page 1 of 22
Rev 1.2
vicorpower.com
800 927.9474
02/2015