PFC Series
Thick Film Power SMD Resistors
• D-PAK Foot Pattern
• Very Low Profile
• Resistances from 0.1 to 51k ohms
• Suitable for Current Sensing
• Power Rating to 25 Watts
• Resistance Tolerances to ±1%
• TCR to ±100ppm/°C
• Isolated Back Plate
SPECIFICATIONS
Type
PFC10
Power Rating with heatsink 1
Short Time Overload 2
Thermal Resistance Rthj-c
Resistance Range
Tolerances (others upon request)
Temperature Coefficient
Operating Temperature
Max Operating Voltage
Capacitance
25 Watts
35 Watts
3.6° K/W
0.1 - 51K Ohms E24+ (includes 2.5, 4.0, 5.0, 8.0, and 16)
1% / 5%
100 ppm/°K
-55°C to 155°C
P * R
2.65 pF
Inductance
15 nH
Withstanding Voltage
Insulation Resistance
Resistor Material
Moisture Sensitivity Level
Mass
1500 VAC
Over 1,000 MΩ
Thick Film
MSL-1
0.324 grams
500 pieces per 254 mm diameter reel within paper box.
Results
Standard Packaging
Test Conditions
Load Life
±1%
±1%
90 min ON, 30 min OFF, 1000 hrs @ 25°C
90-95% RH, 0.1W, 1000 hrs @ 40°C
-55°C for 30 min, +155°C for 30 min, 5 cycles
350°C ±5°C for 3 seconds
Humidity
Temperature Cycle
Solder Heat
±0.25%
±0.1%
Lead Solderability
Vibration
Over 95% of surface
±0.25%
230° ±5°C for 3 seconds
IEC60068-2-6
1 Power rating is 2.5 watt using a simple footprint and without heatsink
2 Overload rating is permissible for continuous duty with back solder pad temerature not exceeding 25°C
Ordering Information
Part Description: Part Type - Resistance - Tolerance
PFC10 10 Ohms 1%
Riedon Inc.
300 Cypress Avenue
Alhambra CA 91801
(626) 284-9901
(626) 284-1704
Revised: 202007_004
© Riedon, Inc.
www.riedon.com
sales@riedon.com