PFB200 Series
1 0 0 - 2 0 0 W S I N G L E O U T P U T D C / D C I N D U S T R I A L
Features
• 100W~200W isolated output
• Efficiency to 85%
• 300KHz switching frequency
• 2:1 Input range
• Regulated outputs
• Continuous short circuit protection
• Industry standard half-brick package
Specifications
GENERAL
Efficiency
INPUT
Voltage range
See table.
48V: 36-75V.
Isolation voltage
±500VD° min. input-output.
±500VD° min. input-case.
±500VD° min. output-case.
±07 ohm min.
300KHz, typ.
±±6 ꢀ 6±.0 ꢀ ±3.5 mm.
Aluminum baseplate with plastic case.
Undervoltage lockout
Positive logic remote
48Vin power up: 34V. 48Vin power down: 32.5V
ON/OFF3.4 input filter PI type.
OUTPUT
Isolation resistance
Switching frequency
Dimensions
Voltage accuracy
Transient response
Eꢀteranl trim adj. range
Ripple and noise 20MHz BW 2.5&3.3&5V: 40mV RMS, maꢀ. ±00mV pk-pk, maꢀ.
±2V&±5V: 60mV RMS, maꢀ. ±50mV pk-pk, maꢀ.
±±1 maꢀ.
<500µsec, 251 step load change.
±±01.
°ase material
STANDARDS
Safety standard
°E mark
Designed to meet UL±950.
Yes.
24V&28V&48V: ±00mV/±50mV/200MV RMS, maꢀ.
240mV/280mV/480mV pk-pk, maꢀ.
Temperature coefficient
Short circuit protection
Line regulation±
Load regulation2
±0.031/ꢁ°.
°ontinuous.
±0.21 maꢀ.
±0.21 maꢀ.
Overvoltage prot. trip range ±±5-±401, 1 Vo nom.
Note:
°urrent limit
±±01-±401 nominal output.
1. Measured from high line to low line.
2. Measured from full load to zero load.
ENVIRONMENTAL
Operating temperature
Storage temperature
Thermal shutdown
3. Logic compatibility
Logic module ON
Logic module OFF
Open Collector ref to -input
Open circuit
<0.8Vdc
–40ꢁ° to +±00ꢁ°.
–55ꢁ° to +±05ꢁ°.
±00ꢁ° typ, case temp.
4. Suffix "N" to the model number with negative logic remote ON/OFF.
56