Datasheet > PE7745DY-170.0M

PE7745DY-170.0M

更新时间： 2024-11-08 04:16:47

品牌	Logo	应用领域
PLETRONICS		机械输出元件振荡器
页数	文件大小	规格书
1页	40K
描述
PECL Output Clock Oscillator, 10MHz Min, 170MHz Max, 170MHz Nom, LEADLESS, 6 PIN

阅读下载

中文翻译

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

PE7745DY-170.0M 技术参数

是否Rohs认证：	符合	生命周期：	Contact Manufacturer
包装说明：	DILCC6,.2	Reach Compliance Code：	compliant
风险等级：	5.67	其他特性：	ENABLE/DISABLE FUNCTION; DIFFERENTIAL OUTPUT; TAPE; TRAY
最长下降时间：	1 ns	频率调整-机械：	NO
频率稳定性：	50%	安装特点：	SURFACE MOUNT
端子数量：	6	最大工作频率：	170 MHz
最小工作频率：	10 MHz	标称工作频率：	170 MHz
最高工作温度：	80 °C	最低工作温度：
振荡器类型：	PECL	输出负载：	50 OHM
封装主体材料：	CERAMIC	封装等效代码：	DILCC6,.2
物理尺寸：	7.0mm x 5.0mm x 1.9mm	电源：	5 V
认证状态：	Not Qualified	最长上升时间：	1 ns
子类别：	Other Oscillators	最大供电电压：	5.5 V
最小供电电压：	4.5 V	标称供电电压：	5 V
表面贴装：	YES	最大对称度：	55/45 %
Base Number Matches：	1

PE7745DY-170.0M 数据手册

Pl tronics, Inc.

19013 36th Ave. W, Suite H Lynnwood, WA 98036 USA

Manufacturer of High Quality Frequency Control Products

40.000 MHz

50.000 MHz

51.840 MHz

53.125 MHz

62.500 MHz

77.760 MHz

170.00 MHz

PE7745D PECL Series

6 Pad 7x5mm Leadless Surface Mount Ceramic Clock Oscillator

–

80.00 MHz

Differential PECL Output with Enable/ Disable Function

See PE1145T for higher frequencies

Standard Specifications

Overall Frequency Stability

± 50 PPM, ± 25 PPM, ± 20 PPM over Operating Temperature Range

ꢁ

ꢀ

Operating Temperature Range 0 to +80 C is standard, but can be extended to 40 to +85ꢀC for certain frequencies

Supply Voltage (Vcc)

Supply Current (Icc)

Jitter

3.3 volts ± 10% standard, but 5.0 volts or 2.5 volts also available

60 to 70 mA typical, 90 mA maximum

1 pS RMS maximum, from 12 kHz to 20 MHz from carrier

Output must be terminated into 50 ohms to (Vcc - 2.0 V). See Test Circuit 5 and Note 1.

Output enabled when Pin 1 is open or at CMOS Logic “1”;

Output disabled when Pin 1 is at CMOS Logic “0”.

Output Load

Enable/Disable Option (E/D)

Symmetry

Tr & Tf

Logic “1”

45/55% to 55/45% at 50% of Vcc level standard, tighter symmetry available

1.0 nS max

Vcc - 1.025 volts minimum

Vcc - 1.620 volts maximum

Output Waveform

PECL with Differential Output

(see Waveform 2)

Logic “0”

Note 1:

In the typical PECL 100K logic output Voh is 2.35 volts and Vol is 1.60 volts at 3.3 Vcc. The center voltage of the PECL is therefore1.975 volts.

If a 50 ohm resistor is placed between the output and Vcc – 2 volts (1.3 volts), the current through the resistor is (1.975 – 1.3) / 50 = 13.5 mA.

The same load can be simulated by a resistor of 147 1% ohms to ground (1.975 / 0.0135 = 146.29 ohms). If additional load current is placed

on the output, its load current must be subtracted from the 13.5 mA to calculate a new load resistor. Using similar calculations, use 274 ± 1%

ohms to ground for 5.0V operation.

Part Numbering Guide

Portions of the part number that appear after the frequency may not be marked on part (C of C provided)

PE77 45 D Y - 80.0M - XXX (Internal Code or blank)

Model

Frequency in MHz

Packaging

Tray or

Special Specifications (choose all that apply)

16mm tape,

8mm pitch

Frequency Stability

ꢀ

E: Extended Operating Temperature Range (- 40 to +85 C)

F: 47.5 /52.5% Symmetry at 50% of Vcc

V: Supply Voltage of 3.3 volts ± 10%

W: Supply Voltage of 2.5 volts ± 5%

Y: Supply Voltage of 5.0 volts ± 10%

45 = ± 50 PPM

44 = ± 25 PPM

20 = ± 20 PPM

Consult factory for available frequencies and specs. Not all options available for all frequencies. A special part number may be assigned.

Frequency Stability is inclusive of frequency shifts due to calibration, temperature, supply voltage, shock, vibration and load

Mechanical: inches (mm)

not to scale

Due to part size and factory abilities, part marking may vary from lot to lot and may contain our part number or an internal code.

Solder Pads

.200 (5.08)

.276 (7.0 ± .2)

For Best Performance,

PLE

Do NOT allow any traces other

than ground under oscillators

(Even in buried layers)

.075 (1.9)

MAX

.05

(1.3)

May 2003

(425) 776 -1880, Fax: (425) 776-2760, ple-sales@pletronics.com, www.pletronics.com

Pl tronics, Inc.

中文翻译

下载PDF

与PE7745DY-170.0M相关器件

型号	品牌	获取价格	描述	数据表
PE7745DY-180.000M	PLETRONICS	获取价格	Oscillator, 40MHz Min, 180MHz Max, 180MHz Nom,
PE7745DY-50.000M	PLETRONICS	获取价格	Oscillator, 40MHz Min, 180MHz Max, 50MHz Nom,
PE7745DY-51.840M	PLETRONICS	获取价格	Oscillator, 40MHz Min, 180MHz Max, 51.84MHz Nom,
PE7745DY-62.500M	PLETRONICS	获取价格	Oscillator, 40MHz Min, 180MHz Max, 62.5MHz Nom,
PE7745DY-80.000M	PLETRONICS	获取价格	Oscillator, 40MHz Min, 180MHz Max, 80MHz Nom,
PE7745DY-80.0M	PLETRONICS	获取价格	Oscillator
PE7745FCV-FREQ	PLETRONICS	获取价格	PECL Output Clock Oscillator, 13MHz Min, 110MHz Max, ROHS COMPLIANT, CERAMIC, LCC-6
PE7745FCW110M	PLETRONICS	获取价格	PECL Output Clock Oscillator, 110MHz Nom, LCC, 6 PIN
PE7745FEV156.25M	PLETRONICS	获取价格	PECL Output Clock Oscillator
PE7745FEV-FREQ-T250	PLETRONICS	获取价格	PECL Output Clock Oscillator, 13MHz Min, 110MHz Max, ROHS COMPLIANT, CERAMIC, LCC-6

与PE7745DY-170.0M相关文章

英伟达新AI芯片Rubin或提前半年亮相
2024-11-05

16
苹果iPhone 17将全系采用三星/LG显示LTPO OLED面板
2024-11-05

13
三星深化印度制造布局，供应链本地化进程加速
2024-10-29

37
芯擎科技“星辰一号”自动驾驶芯片点亮成功，2025年量产在即
2024-10-29

34

产品中心

服务支持

精选活动

关于我们

帮助中心

PE7745DY-170.0M

PE7745DY-170.0M 技术参数

PE7745DY-170.0M 数据手册

与PE7745DY-170.0M相关器件

与PE7745DY-170.0M相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

PE7745DY-170.0M

PE7745DY-170.0M 技术参数

PE7745DY-170.0M 数据手册

与PE7745DY-170.0M相关器件

与PE7745DY-170.0M相关文章

您还可以找

您在本页遇到什么问题？