5秒后页面跳转
PE1145MEFY-120.0M PDF预览

PE1145MEFY-120.0M

更新时间: 2024-11-06 09:24:31
品牌 Logo 应用领域
PLETRONICS /
页数 文件大小 规格书
4页 69K
描述
Oscillator

PE1145MEFY-120.0M 数据手册

 浏览型号PE1145MEFY-120.0M的Datasheet PDF文件第2页浏览型号PE1145MEFY-120.0M的Datasheet PDF文件第3页浏览型号PE1145MEFY-120.0M的Datasheet PDF文件第4页 
Pl tronics, Inc.  
.
19013 36th Ave. W, Suite H Lynnwood, WA 98036 USA  
Manufacturer of High Quality Frequency Control Products  
Differential PECL Series  
Differential PECL Output, Some with Enable/ Disable Function  
Available in 9 Different Package/Configurations, See Next Pages  
Standard Specifications  
Overall Frequency Stability  
± 50 PPM, ± 25 PPM, ± 20 PPM over Operating Temperature Range  
Operating Temperature Range 0 to +80°C is standard, but can be extended to - 40 to +85°C  
Storage Temperature Range  
Supply Voltage (Vcc)  
Supply Current (Icc)  
- 55 to +125°C  
3.3 volts ± 5% standard, but 5.0 volts or 2.5 volts also available. See Test Cirucit 5.  
< 250 MHz = 90 mA maximum, 250 MHz and above = 100 mA maximum  
Output High Level  
2.275 V minimum referenced to Ground, Vcc = 3.300V,  
0.975 V minimum referenced to termination voltage,  
- 1.025 V minimum referenced to Vcc  
Output Low Level  
1.680 V maximum referenced to Ground, Vcc = 3.300V,  
0.380 V maximum referenced to termination voltage,  
- 1.620 V maximum referenced to Vcc  
Output Symmetry  
Output Rise & Fall (Tr & Tf)  
Jitter  
E/D Internal Pullup  
V disable  
45/55% referenced to 50% of amplitude  
1.0 nS maximum when Vth is 10% and 90% of waveform  
1 pS RMS maximum measured from 12 kHz to 20 MHz from Fnominal  
50 kohm minimum to Vcc  
0.3 Vcc maximum referenced to Ground  
V enable  
0.7 Vcc minumum referenced to Ground  
PE7745D only Output Enable / Disable  
High Level Input Current  
Low Level Input Current  
Output Enable Time  
-20 uA maximum at Enable / Disable Pin = 0.7 Vcc  
-200 uA maximum at Enable / Disable Pin = 0 V  
200 nS maximum at output enable or 1 mS maximum at output enabled and stable  
200 nS maximum at output disable  
Output Disable Time  
Vcc Supply Current disabled < 1 mA. Both outputs are high impedance when disabled.  
All other models Output Enable/Disable (E/D)  
Output Enable Time  
Output Disable Time  
When Disabled  
100 nS maximum  
100 nS maximum  
Q Output = Logic Low, QN Output = Logic High. Both Outputs are active  
Note 1:  
PECL and ECL are identical circuits.  
ECL has the most positive pin as ground and is ideally terminated by 50 ohms to - 2.00 V  
PECL has the most negative pin as ground and is ideally terminated by 50 ohms to the most (positive voltage less 2.00 V)  
Mechanical: See Next Pages  
D Package  
J Package Replacement  
B Package  
M Package  
Mar 2004  
(425) 776 -1880, Fax: (425) 776-2760, ple-sales@pletronics.com, www.pletronics.com  
1
Pl tronics, Inc.  

与PE1145MEFY-120.0M相关器件

型号 品牌 获取价格 描述 数据表
PE1145MEV PLETRONICS

获取价格

PE11M Series 3.3 V PECL Clock Oscillators
PE1145MEV-10.0M PLETRONICS

获取价格

Oscillator, 10MHz Min, 170MHz Max, 10MHz Nom
PE1145MEV-170.0M PLETRONICS

获取价格

Oscillator, 10MHz Min, 170MHz Max, 170MHz Nom
PE1145MF-10.0M PLETRONICS

获取价格

Oscillator
PE1145MF-170.0M PLETRONICS

获取价格

Oscillator
PE1145MF-FREQ PLETRONICS

获取价格

PECL Output Clock Oscillator, 1.5MHz Min, 180MHz Max
PE1145MFV-1.5M PLETRONICS

获取价格

Oscillator
PE1145MFV-170.0M PLETRONICS

获取价格

Oscillator, 10MHz Min, 170MHz Max, 170MHz Nom
PE1145MFY-1.5M PLETRONICS

获取价格

Oscillator
PE1145MFY-10.0M PLETRONICS

获取价格

Oscillator, 10MHz Min, 170MHz Max, 10MHz Nom