PD64004A
4-port PoE PSE Manager
PD64004A is a four-port, mixed-signal, high-voltage Power over Ethernet PSE Manager. The IC
allows the detection of IEEE 802.3af-2003 powered devices, ensuring safe power feeding and
removal over Ethernet ports. With full digital control via a serial communication interface and a
minimum of external components, the IC integrates in multi-port and highly populated Ethernet
switches.
The PD64004A has three possible working configurations: an Automatic stand-alone mode, for basic PoE
functions, the PoE+ Mode supporting legacy devices and autonomous operation with the PD33000G MCU and an
Enhanced mode, for extended functions and added flexibility with the PD63000G and PD83000G MCU’s.
Features
Benefits
IEEE 802.3af-2003
ꢀ
Compliant with IEEE 802.3af and pre-standard
PD’s
ꢀ Freedom to power all PoE PD’s including
Cisco’s inline power
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
4-ports standalone PoE control
Power classification with bypass option
AC disconnect
ꢀ Highest integration on the market,
enabling the lowest real-estate occupation
ꢀ Reliable and simple AC implementation
ꢀ Supports low power devices
DC disconnect with DC modulation
Supports RFC3621
ꢀ Enables integration in Managed Switches
Architecture
ꢀ
ꢀ
ꢀ
ꢀ
I 2 C or UART host interface
ꢀ Backwards compatible with all PD64008-
based message based user interface
7-bit I 2 C address selectability
ꢀ Up to 1528 ports on a switch
ꢀ Can be used with PD64012G
Opto-coupler compatible communication lines
Up to 88 ports operating autonomously
Technology
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Best-in-industry integration
ꢀ Minimum per port external components
ꢀ No need for external DC/DC converter
Single operating voltage source (44 to 57V)
80V SmartMOS8 technology
-40 o C to +85 o C operating ambient temperature
QFN-48-PS package, ROHS compliant
ꢀ Power, high-voltage analog and high-
density digital logic functions
ꢀ Fit for industrial applications
System Enhancement
ꢀ
ꢀ
ꢀ
Per-IC soft start mechanism
System-wide inrush protection
ꢀ Minimal power supply stress and EMI
noises
ꢀ Power management based on power
allocation and priority map, on class value
or on both, provides full flexibility and
optimal power supply usage
Internal voltages monitoring and auto reset
mechanism (Power-On_Reset)
ꢀ
Over-voltage and under-voltage protection/lock-
out
ꢀ Prioritization of ports in case of power
reduction
ꢀ
ꢀ
Dynamic Power Management
Emergency Power Management (Enhanced
Mode)
ꢀ Used for power supply failure conditions
ꢀ Capable of powering of up to 31W over 4-
pairs
ꢀ
Support for 4-pairs High power architecture
(Enhanced Mode)
ꢀ Logical to physical port map
ꢀ
ꢀ
ꢀ
ꢀ
Maskeable Interrupt
ꢀ User can receive interrupts on status or
have automatic/direct LED driving
Programmable port matrix (Enhanced mode)
LED streaming (Enhanced) or driving (PoE+)
Temperature sense/monitoring
ꢀ Enables system monitoring
ꢀ Per port thermal protection, including PCB
protection
© 2007 PowerDsine Ltd.
All rights reserved.
PowerDsine is a registered trademark of PowerDsine LTD. All other products or trademarks are property of their respective owners. The product
described by this manual is a licensed product of PowerDsine.
1
www.powerdsine.com
PowerDsine 2007
Information in this document subject
to change without prior notice.
March 2007
This document contains information that is proprietary to PowerDsine. As such, it is confidential and its disclosure is strictly prohibited by applicable law. If you and/or your company and PowerDsine
have executed a Non-Disclosure Agreement, then this document is being provided in connection with the Agreement, and the information contained herein is covered by the Agreement and under its
terms may not be disclosed or used and must be protected by you and/or your company.