5秒后页面跳转
PCF8574TS/3 PDF预览

PCF8574TS/3

更新时间: 2024-11-11 12:02:51
品牌 Logo 应用领域
恩智浦 - NXP /
页数 文件大小 规格书
33页 800K
描述
Remote 8-bit I/O expander for I2C-bus with interrupt

PCF8574TS/3 数据手册

 浏览型号PCF8574TS/3的Datasheet PDF文件第2页浏览型号PCF8574TS/3的Datasheet PDF文件第3页浏览型号PCF8574TS/3的Datasheet PDF文件第4页浏览型号PCF8574TS/3的Datasheet PDF文件第5页浏览型号PCF8574TS/3的Datasheet PDF文件第6页浏览型号PCF8574TS/3的Datasheet PDF文件第7页 
PCF8574; PCF8574A  
Remote 8-bit I/O expander for I2C-bus with interrupt  
Rev. 5 — 27 May 2013  
Product data sheet  
1. General description  
The PCF8574/74A provides general-purpose remote I/O expansion via the two-wire  
bidirectional I2C-bus (serial clock (SCL), serial data (SDA)).  
The devices consist of eight quasi-bidirectional ports, 100 kHz I2C-bus interface, three  
hardware address inputs and interrupt output operating between 2.5 V and 6 V. The  
quasi-bidirectional port can be independently assigned as an input to monitor interrupt  
status or keypads, or as an output to activate indicator devices such as LEDs. System  
master can read from the input port or write to the output port through a single register.  
The low current consumption of 2.5 A (typical, static) is great for mobile applications and  
the latched output ports directly drive LEDs.  
The PCF8574 and PCF8574A are identical, except for the different fixed portion of the  
slave address. The three hardware address pins allow eight of each device to be on the  
same I2C-bus, so there can be up to 16 of these I/O expanders PCF8574/74A together on  
the same I2C-bus, supporting up to 128 I/Os (for example, 128 LEDs).  
The active LOW open-drain interrupt output (INT) can be connected to the interrupt logic  
of the microcontroller and is activated when any input state differs from its corresponding  
input port register state. It is used to indicate to the microcontroller that an input state has  
changed and the device needs to be interrogated without the microcontroller continuously  
polling the input register via the I2C-bus.  
The internal Power-On Reset (POR) initializes the I/Os as inputs with a weak internal  
pull-up 100 A current source.  
2. Features and benefits  
I2C-bus to parallel port expander  
100 kHz I2C-bus interface (Standard-mode I2C-bus)  
Operating supply voltage 2.5 V to 6 V with non-overvoltage tolerant I/O held to VDD  
with 100 A current source  
8-bit remote I/O pins that default to inputs at power-up  
Latched outputs directly drive LEDs  
Total package sink capability of 80 mA  
Active LOW open-drain interrupt output  
Eight programmable slave addresses using three address pins  
Low standby current (2.5 A typical)  
40 C to +85 C operation  
ESD protection exceeds 2000 V HBM per JESD22-A114 and 1000 V CDM per  
JESD22-C101  

PCF8574TS/3 替代型号

型号 品牌 替代类型 描述 数据表
PCF8574TS/3,112 NXP

完全替代

PCF8574; PCF8574A - Remote 8-bit I/O expander
PCF8574ATS/3,118 NXP

完全替代

PCF8574; PCF8574A - Remote 8-bit I/O expander

与PCF8574TS/3相关器件

型号 品牌 获取价格 描述 数据表
PCF8574TS/3,112 NXP

获取价格

PCF8574; PCF8574A - Remote 8-bit I/O expander
PCF8574TS/3,518 NXP

获取价格

IC IC,I/O PORT,8-BIT,CMOS,SSOP,20PIN,PLASTIC, Parallel IO Port
PCF8574TS/F3 NXP

获取价格

IC 8 I/O, PIA-GENERAL PURPOSE, PDSO20, 4.40 MM, PLASTIC, MO-152, SOT-266-1, SSOP-20, Paral
PCF8574TS/F3,112 NXP

获取价格

PCF8574; PCF8574A - Remote 8-bit I/O expander
PCF8574TS/F3,512 NXP

获取价格

PCF8574; PCF8574A - Remote 8-bit I/O expander
PCF8574TS/F3,518 NXP

获取价格

PCF8574; PCF8574A - Remote 8-bit I/O expander
PCF8574TSD NXP

获取价格

暂无描述
PCF8574TSD-T NXP

获取价格

IC 8 I/O, PIA-GENERAL PURPOSE, PDSO20, Parallel IO Port
PCF8574TS-T NXP

获取价格

IC 8 I/O, PIA-GENERAL PURPOSE, PDSO20, Parallel IO Port
PCF8574T-T NXP

获取价格

IC 8 I/O, PIA-GENERAL PURPOSE, PDSO16, Parallel IO Port