PCA9545C

更新时间： 2024-09-18 10:17:07

品牌	Logo	应用领域
恩智浦 - NXP		开关
页数	文件大小	规格书
28页	152K
描述
4-channel I2C-bus switch with interrupt logic and reset

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

PCA9545C 数据手册

PCA9545A/45B/45C

4-channel I²C-bus switch with interrupt logic and reset

Rev. 07 — 19 June 2009

Product data sheet

1. General description

The PCA9545A/45B/45C is a quad bidirectional translating switch controlled via the

I²C-bus. The SCL/SDA upstream pair fans out to four downstream pairs, or channels. Any

individual SCx/SDx channel or combination of channels can be selected, determined by

the contents of the programmable control register. Four interrupt inputs, INT0 to INT3, one

for each of the downstream pairs, are provided. One interrupt output, INT, acts as an AND

of the four interrupt inputs.

An active LOW reset input allows the PCA9545A/45B/45C to recover from a situation

where one of the downstream I²C-buses is stuck in a LOW state. Pulling the RESET pin

LOW resets the I²C-bus state machine and causes all the channels to be deselected as

does the internal power-on reset function.

The pass gates of the switches are constructed such that the V_DDpin can be used to limit

the maximum high voltage which will be passed by the PCA9545A/45B/45C. This allows

the use of different bus voltages on each pair, so that 1.8 V or 2.5 V or 3.3 V parts can

communicate with 5 V parts without any additional protection. External pull-up resistors

pull the bus up to the desired voltage level for each channel. All I/O pins are 5 V tolerant.

The PCA9545A, PCA9545B and PCA9545C are identical except for the ﬁxed portion of

the slave address.

2. Features

I 1-of-4 bidirectional translating switches

I I²C-bus interface logic; compatible with SMBus standards

I 4 active LOW interrupt inputs

I Active LOW interrupt output

I Active LOW reset input

I 2 address pins allowing up to 4 devices on the I²C-bus

I Alternate address versions A, B and C allow up to a total of 12 devices on the bus for

larger systems or to resolve address conﬂicts

I Channel selection via I²C-bus, in any combination

I Power-up with all switch channels deselected

I Low R_onswitches

I Allows voltage level translation between 1.8 V, 2.5 V, 3.3 V and 5 V buses

I No glitch on power-up

I Supports hot insertion

I Low standby current

I Operating power supply voltage range of 2.3 V to 5.5 V

12 3 4 5 6 7...28

中文翻译

下载PDF

与PCA9545C相关器件

型号	品牌	获取价格	描述	数据表
PCA9545CPW	NXP	获取价格	4-channel I2C-bus switch with interrupt logic and reset
PCA9545D	NXP	获取价格	4-channel I2C switch with interrupt logic and reset
PCA9545D-T	NXP	获取价格	IC 9545 SERIES, 4 LINE TO 1 LINE MULTIPLEXER, TRUE OUTPUT, PDSO20, 7.50 MM, PLASTIC, MS-01
PCA9545PW	NXP	获取价格	4-channel I2C switch with interrupt logic and reset
PCA9545PW-T	NXP	获取价格	IC 9545 SERIES, 4 LINE TO 1 LINE MULTIPLEXER, TRUE OUTPUT, PDSO20, 4.40 MM, PLASTIC, MO-15
PCA9546	NXP	获取价格	4-channel I2C switch with reset
PCA9546A	NXP	获取价格	4-channel I2C switch with reset
PCA9546A	TI	获取价格	4-CHANNEL I2C AND SMBus SWITCH WITH RESET FUNCTION
PCA9546A_1	TI	获取价格	4-CHANNEL I2C AND SMBus SWITCH WITH RESET FUNCTION
PCA9546A_2	TI	获取价格	4-CHANNEL I2C AND SMBus SWITCH WITH RESET FUNCTION