PC
Vishay Dale
www.vishay.com
Inductors, Subminiature, Shielded, Radial Leaded
FEATURES
• Classification is grade 1, class B
• Subminiature shielded
• Custom values up to 100 000 μH are available
upon request
• Printed board mounting facilitated by 0.200" [5.08 mm]
grid spacing
• Radial lead fixed inductor
• High Q values
• Unitized epoxy-molded construction
• Shielded construction to allow maximum density
packaging
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
ELECTRICAL SPECIFICATIONS
Inductance Tolerance: 10 %
Dielectric Strength: 840 VRMS at sea level
Working Voltage: 300 VDC
DENSITY SPECIFICATIONS
Weight: 1.5 g maximum
Q and SRF Values: Minimum not less than 80 % of
specified value
Shielding: 3 % coupling maximum when two units are
tested side by side
Maximum Current: Based on temperature rise not to
exceed 35 °C at + 90 °C ambient
ENVIRONMENTAL SPECIFICATIONS
Moisture: Per MIL-STD-202, method 106
MECHANICAL SPECIFICATIONS
Operating Temperature: - 55 °C to + 125 °C
Terminal Pull: 3 pounds
Vibration: Low frequency, 10 Hz to 55 Hz at 0.06" [1.52 mm]
maximum total excursion at rate of 1 linear sweep per
minute for 2 h repeated for each of three mutually
perpendicular planes
Shock: 100 g, 6 ms, body mounted
DIMENSIONS in inches [millimeters]
0.26ꢁ 0.0ꢀ0
[6.73 0.2ꢁ54 ꢂDi.
0.300 0.0ꢀ0
[7.62 0.2ꢁ54
0.270 [6.864
Mix.
0.080 0.0ꢀ0
[2.03 0.2ꢁ54
3/8 ꢀ/ꢀ6
[9.ꢁ2 ꢀ.ꢁ94
#25 0.020 0.002
[0.ꢁ08 0.0ꢁꢀ4 ꢃTC
0.200 0.00ꢁ
[ꢁ.08 0.ꢀ274
STANDARD ELECTRICAL SPECIFICATIONS
TEST
FREQ.
(MHz)
DCR
MAX.
()
RATED DC
CURRENT
(mA)
INCREMENTAL
CURRENT
(mA) (1)
IND.
(μH)
SRF NOM.
(MHz)
TOL.
(%)
Q
NOM.
MODEL
PC
PC
PC
PC
PC
PC
PC
PC
0.10
0.12
0.15
0.18
0.22
0.27
0.33
0.39
0.47
10
10
10
10
10
10
10
10
10
70
70
70
70
70
80
80
80
80
25
25
25
25
25
25
25
25
25
> 250
> 250
> 250
> 250
> 250
> 250
> 250
250
0.030
0.030
0.030
0.035
0.038
0.040
0.040
0.045
0.045
2500
2500
2500
2400
2300
2200
2200
2100
2100
2500
2500
2500
2400
2300
2200
2200
2100
2100
PC
230
Note
(1)
Incremental current: The DC current required to cause a 5 % reduction in the nominal inductance value.
Revision: 05-Jun-13
Document Number: 34070
1
For technical questions, contact: magnetics@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000