P6SMBJ SERIES
SSUURRFFAACCEE MMOOUUNNTT TTRRAANNSSIIEENNTT
VVOOLLTTAAGGEE SSUUPPPPRREESSSSOORR
CCHHEENNGG--YYII
ELECTRONIC
VOLTAGE 5.0 to 170 VOLTS
PEAK PULSE POWER 600 WATTS
SMB/DO-214AA
.075(1.91)
.083(2.11)
FEATURES
.130(3.30)
.155(3.94)
For surface mounted applications in order to
optimize board space
Low profile package
.160(4.06)
.185(4.70)
Built-in strain relief
.006(.152)
.012(.305)
Glass passivated junction
Low inductance
.083(2.13)
.096(2.44)
Excellent clamping capability
Repetition Rate (duty cycle):0.01%
Fast response time: typically less then 1.0 ps
from 0 volts to BV for unidirectional types
Typical ID less then 1 A above 10V
.030(0.76)
.050(1.27)
.004(.102)
.008(.203)
.200(5.08)
.220(5.59)
0
High tempreature soldering:260 C/10 seconds
at terminals
Plastic package has Underwriters Laboratory
Flammability Classification 94V-O
Dimensions in inches and (millimeters)
MECHANICAL DATA
Case:JEDEC DO-214AA molded plastic over passivated junction
Terminals:Solder plated solderable per MIL-STD-750, Method 2026
Polarity:Color band denotes positive end (cathode) except Bidirectional
Standard Packaging: 12mm tape (EIA STD EIA-481-1)
Weight:0.003 ounce, 0.093 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
0
Ratings at 25 C ambient temperature unless otherwise specified.
RATINGS
SYMBOL
VALUE
UNITS
Watts
Amps
Peak Pulse Power Dissipation on 10/1000 s (NOTE 1,2,Fig.1)
Peak Pulse on Current 10/1000 s waveform (NOTE 1,Fig.3)
PPPM
Minimum 600
See Table 1
IPPM
Peak forward Surge Current 8.3ms single half sine-wave
superimposed on rated load (JEDEC Method)(NOTE 2,3)
Amps
IFSM
100.0
0
Operating Junction and Storage Temperature Range
TJ, TSTG
-55 to + 150
C
0
Notes: 1. Non-repetitive current pulse, per Fig.3 and derated above TA=25 C per Fig.2
2. Measured on 5.0mm2 (0.13mm thick) land areas
3. Measured on 8.3mm, single half sine-wave or equivalent square wave, duty cycle=4 pulses per minute maximum.
265