Features
Applications
■ Surface Mount SMB package
■ Breakdown Voltage: 15 to 68 volts
■ Power Dissipation: 600 watts
■ RoHS compliant* and halogen free**
■ AEC-Q101 compliant***
■ Protection of power buses
■ Protection of I/O interfaces
■ Overvoltage transient protection
■ Telecom, computer, industrial and
consumer electronics applications
P6SMB-Q Transient Voltage Suppressor Diode Series
General Information
The markets of portable communications, computing and video equipment are challenging the semiconductor industry to develop
increasingly smaller electronic components.
Bourns offers Transient Voltage Suppressor Diodes for surge and ESD protection applications, in compact chip package DO-214AA (SMB)
size format. The Transient Voltage Suppressor series offers a choice of Breakdown Voltages from 15 V up to 68 V. Typical fast response
times are less than 1.0 picosecond for unidirectional devices and less than 5.0 picoseconds for bidirectional devices from 0 V to Minimum
Breakdown Voltage.
Bourns® Chip Diodes conform to JEDEC standards, are easy to handle with standard pick and place equipment and the flat configuration
minimizes roll away.
Maximum Characteristics (@ T = 25 °C Unless Otherwise Noted)
A
Parameter
Symbol
Value
Unit
(Note 1,2)
Peak Pulse Power Dissipation (T = 1 ms)
P
P
600
Watts
PK
Peak Forward Surge Current
8.3 ms Single Half Sine Wave Superimposed on Rated Load
(JEDEC Method)
I
100
3.5
Amps
Volts
FSM
(Note 3)
Maximum Instantaneous Forward Voltage @ I = 50 A
PP
V
T
F
(For Unidirectional Units Only)
Operating Temperature Range
Storage Temperature Range
-55 to +150
-55 to +150
°C
°C
J
T
STG
1. Non-repetitive current pulse, per Pulse Waveform graph and derated above T = 25 °C per Pulse Derating Curve.
A
2. Thermal Resistance Junction to Lead.
3. 8.3 ms Single Half-Sine Wave duty cycle = 4 pulses maximum per minute (unidirectional units only).
How to Order
P6SMB 15 CA - Q
Asia-Pacific:
Series
Tel: +886-2 2562-4117
P6SMB= SMB/DO-214AA
Email: asiacus@bourns.com
Breakdown Voltage
Europe:
Tel: +36 88 885 877
Email: eurocus@bourns.com
15 to 68 = 15 to 68 V
(Volts)
BR
Suffix
A = 5 % Tolerance Unidirectional Device
CA = 5 % Tolerance Bidirectional Device
The Americas:
Tel: +1-951 781-5500
Email: americus@bourns.com
AEC-Q101 Suffix
Q = AEC-Q101 Compliant, 13-inch Reel (3000 pcs.)
www.bourns.com
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov
*
RoHS Directive 2015/863, Mar 31, 2015 and Annex.
** Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br)
and Chlorine (Cl) content is 1500 ppm or less.
*** Q suffix for applications requiring appropriate AEC-Q101 compliance for electronic limiters.
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.