P6KE SERIES
600 Watts Transient Voltage SuppressorDiodes
DO-15
Features
ꢀ
Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
600W surge capability at 10 x 1000 us
Excellent clamping capability
Low Dynamic impedance
ꢀ
ꢀ
ꢀ
ꢀ
waveform
Fast response time: Typically less than 1.0ps
from 0 volts to VBR for unidirectional and 5.0 ns
for bidirectional
ꢀ
ꢀ
Typical IR less than 1uA above 10V
High temperature soldering guaranteed:
260oC / 10 seconds / .375”,(9.5mm) lead length
/ 5lbs.,(2.3kg) tension
Dimensions in inches and (millimeters)
Mechanical Data
ꢀ
Case: Molded plastic
ꢀ
Polarity: Color band denotes cathode except
bipolar
ꢀ
Weight: 0.42gram
Maximum Ratings and Electrical Characteristics
Rating at 25 oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Symbol
Value
Minimum 600
Units
Watts
Peak Power Dissipation at TA=25OC, Tp=1ms (Note 1)
PPK
Steady State Power Dissipation at TL=75 oC
Lead Lengths .375”, 9.5mm (Note 2)
PD
5.0
Watts
Peak Forward Surge Current, 8.3 ms Single Half
Sine-wave Superimposed on Rated Load
(JEDEC method) (Note 3)
Maximum Instantaneous Forward Voltage at 50.0A for
Unidirectional Only (Note 4)
IFSM
VF
100
Amps
Volts
3.5 / 5.0
Typical Thermal Resistance (Note 5)
R
R
10
62
ΘJL
oC/W
oC
ΘJA
Operating and Storage Temperature Range
TJ, TSTG
-55 to + 175
Notes:
1. Non-repetitive Current Pulse Per Fig. 3 and Derated above TA=25oC Per Fig. 2.
2. Mounted on Copper Pad Area of 0.4 x 0.4” (10 x 10 mm) Per Fig. 4.
3. 8.3ms Single Half Sine-wave or Equivalent Square Wave, Duty Cycle=4 Pulses Per
Minutes Maximum.
≤
4. VF=3.5V for Devices of VBR 200V and VF=5.0V Max. for Devices of VBR>200V.
5. Measured on P.C.B. with 10mm x 10mm.
Devices for Bipolar Applications
1. For Bidirectional Use C or CA Suffix for Types P6KE6.8 through Types P6KE440.
2. Electrical Characteristics Apply in Both Directions.
- 570 -
http://www.luguang.cn
mail:lge@luguang.cn