PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR
Breakdown Voltage
Peak Pulse Power
6.8 to 440 Volts
600 Watts
P6KE6.8 THRU P6KE440CA(GPP)
P6KE6.8J THRU P6KE440CAJ(OPEN JUNCTION)
FEATURES
DO-204AC (DO-15)
·
Plastic package has Underwriters Laboratory
Flammability Classification 94V-O
.034(0.86)
DIA.
.028(0.71)
1.0(25.4)
MIN.
·
·
Glass passivated or silastic guard junction (open junction)
600W peak pulse power capability with a 10/1000μs
Waveform, repetition rate (duty cycle): 0.01%
Excellent clamping capability
Low incremental surge resistance
Fast response time: typically less than 1.0ps from 0 Volts to
V(BR) for unidirectional and 5.0ns for bidirectional types
·
·
·
.300 (7.6)
.230 (5.8)
.140 (3.6)
DIA.
.104 (2.6)
1.0(25.4)
MIN.
·
·
Typical I less than 1.0μA above 10V
D
High temperature soldering guaranteed:
265℃/10 seconds, 0.375” (9.5mm) lead length,
51bs.(2.3kg) tension
Dimensions in inches and (millimeters)
MECHANICAL DATA
·
·
·
Cass: JEDEC DO-204AC,molded plastic body over
passivated junction
Terminals: Axial leads, solderable per
MIL-STD-750, Method 2026
Polarity: Color bands denotes positive end (cathode)
except for bidirectional types
·
·
Mounting position: any
Weight: 0.015 ounces, 0.4 gram
DEVICES FOR BIDRECTIONAL APPLICATIONS
·
·
For bidirectional use C or CA Suffix for types P6KE6.8 thru P6K440 (e.g. P6KE6.8C, P6KE440CA).
Electrical Characteristics apply in both directions.
Suffix A denotes ±5% tolerance device, No suffix A denotes ±10% tolerance device
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
·
Ratings at 25℃ ambient temperature unless otherwise specified
Ratings
Symbols
Value
Unit
PPPM
IPPM
Minimum 400 Watts
Peak Pulse power dissipation with a 10/1000μs waveform(NOTE1,FIG.1)
Peak Pulse current with a 10/1000μs waveform (NOTE1,FIG.3)
See Table 1
5.0
Watt
PM(AV)
Amps
Steady Stage Power Dissipation at TL=75℃
Lead lengths 0.375”(9.5)(Note2)
Peak forward surge current, 8.3ms single half
sine-wave superimposed on rated load
(JEDEC Method) (Note3)
Maximum instantaneous forward voltage at 50.0A for
unidirectional only (NOTE 4)
IFSM
100.0
Amps
Volts
3.5/5.0
VF
Operating Junction and Storage Temperature Range
TJ, TSTG
50 to +150
℃
Notes:
1. Non-repetitive current pulse, per Fig.3 and derated above TA=25℃ per Fig.2
2. Mounted on copper pad area of 1.6×1.6”(40×40mm) per Fig 5.
3. Measured at 8.3ms single half sine-wave or equivalent square wave duty cycle = 4 pulses per minutes maximum.
4. VF=3.0 Volts max. for devices of V (BR) ≤200V, and VF=5.0V for devices of V(BR)≥200v