DATA SHEET
SEMICONDUCTOR
P6KE Series
GLASS PASSIVATED JUNCTION
TRANSIENT VOLTAGE SUPPRESSOR
600 Watt Peak Power VOLTAGE- 6.8 to 540 Volts
FEATURES
DO-15
Unit:inch(mm)
‧ Plastic package has Underwriters Laboratory
Flammability Classification 94V-O
‧ Typical IR less than 1µA above 10V
‧ 600W surge capability at 1ms
.140 (3.6)
.104 (2.6)
DIA.
1.0 (25.4)
MIN.
‧ Excellent clamping capability
‧ Low zener impedance
‧ Fast response time: typically less than 1.0 ps from 0 volts to BV min
‧ Pb free product are available : 99% Sn above can meet RoHS environment substance
directive request
.300 (7.6)
.230 (5.8)
‧ High temperature soldering : 260OC / 10 seconds at terminals
‧ Pb free product at available : 99% Sn above meet RoHS
environment substance directive request
1.0 (25.4)
MIN.
.034 (.86)
.028 (.71)
DIA.
MECHANICAL DATA
‧ Case: JEDEC DO-15 Molded plastic
‧ Terminals: Axial leads, solderable per MIL-STD-750, Method 2026
‧ Polarity: Color band denoted cathode except Bipolar
‧ Mounting Position: Any
‧ Weight: 0.015 ounce, 0.4 gram
DEVICES FOR BIPOLAR APPLICATIONS
For Bidirectional use C or CA Suffix for types
Electrical characteristics apply in both directions.
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25°Cambient temperature unless otherwise specified. Resistive or inductive load, 60Hz.
For Capacitive load derate current by 20%
RATING
SYMBOL
VALUE
UNITS
Peak Power Dissipation at TA=25°C, TP=1ms(Note 1)
Steady State Power Dissipation at TL=75°C
Lead Lengths .375",(9.5mm)(Note 2)
PPK
600
Watts
PD
5.0
Watts
Peak Forward Surge Current, 8.3ms Single Half Sine-Wave
Superimposed on Rated Load(JECED Method) (Note 3)
Operating and Storage Temperature Range
NOTES:
IFSM
100
Amps
°C
TJ, TSTG
-55 to +150
1. Non-repetitive current pulse, per Fig. 3 and derated above TA=25°C per Fig. 2.
2. Mounted on Copper Leaf area of 1.57 in2 (40mm2).
3. 8.3ms single half sine-wave, duty cycle= 4 pulses per minutes maximum.
http://www.yeashin.com
1
REV.02 20120403