WTE
PO WER SEMICONDUCTORS
P6KE SERIES
600W TRANSIENT VOLTAGE SUPPRESSORS
Features
!
Glass Passivated Die Construction
!
!
!
!
!
!
600W Peak Pulse Power Dissipation
6.8V – 440V Standoff Voltage
Uni- and Bi-Directional Versions Available
Excellent Clamping Capability
Fast Response Time
A
B
A
Plastic Case Material has UL Flammability
Classification Rating 94V-O
C
D
DO-15
Mechanical Data
Dim
A
Min
25.4
5.50
0.71
2.60
Max
—
!
!
Case: JEDEC DO-15 Low Profile Molded Plastic
Terminals: Axial Leads, Solderable per
MIL-STD-202, Method 208
B
7.62
0.864
3.60
C
!
!
Polarity: Cathode Band or Cathode Notch
Marking:
Unidirectional – Device Code and Cathode Band
Bidirectional – Device Code Only
Weight: 0.40 grams (approx.)
D
All Dimensions in mm
!
“C” Suffix Designates Bi-directional Devices
“A” Suffix Designates 5% Tolerance Devices
No Suffix Designates 10% Tolerance Devices
Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified
Characteristic
Symbol
PPPM
Value
600 Minimum
100
Unit
W
Peak Pulse Power Dissipation at TA = 25°C (Note 1, 2, 5) Figure 3
Peak Forward Surge Current (Note 3)
IFSM
A
Peak Pulse Current on 10/1000µS Waveform (Note 1) Figure 1
Steady State Power Dissipation (Note 2, 4)
IPPM
See Table 1
5.0
A
PM(AV)
Tj, TSTG
W
Operating and Storage Temperature Range
-65 to +175
°C
Note: 1. Non-repetitive current pulse, per Figure 1 and derated above TA = 25°C per Figure 4.
2. Mounted on 40mm2 copper pad.
3. 8.3ms single half sine-wave duty cycle = 4 pulses per minutes maximum.
4. Lead temperature at 75°C = TL .
5. Peak pulse power waveform is 10/1000µS.
P6KE SERIES
1 of 5
© 2002 Won-Top Electronics