P6KE6.8A thru P6KE540A
Vishay General Semiconductor
www.vishay.com
®
TRANSZORB Transient Voltage Suppressors
FEATURES
• Glass passivated chip junction
• Available in uni-directional and bi-directional
• 600 W peak pulse power capability with a
10/1000 μs waveform, repetitive rate (duty cycle):
0.01 %
• Excellent clamping capability
DO-15 (DO-204AC)
• Very fast response time
• Low incremental surge resistance
• Solder dip 275 °C max. 10 s, per JESD 22-B106
• AEC-Q101 qualified
• Material categorization: for definitions of compliance
PRIMARY CHARACTERISTICS
please see www.vishay.com/doc?99912
VWM
5.8 V to 459 V
6.8 V to 540 V
6.8 V to 440 V
600 W
TYPICAL APPLICATIONS
V
BR uni-directional
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and lighting
on ICs, MOSFET, signal lines of sensor units for consumer,
computer, industrial, automotive, and telecommunication.
V
BR bi-directional
PPPM
PD
5.0 W
I
FSM (uni-directional only)
100 A
TJ max.
175 °C
MECHANICAL DATA
Polarity
Uni-directional, bi-directional
DO-15 (DO-204AC)
Case: DO-15 (DO-204AC)
Molded epoxy over passivated chip
Package
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS compliant, commercial grade
Base P/NHE3 - RoHS compliant, AEC-Q101 qualified
Terminals: matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix
meets JESD 201 class 2 whisker test
DEVICES FOR BI-DIRECTION APPLICATIONS
For bi-directional types, use CA suffix (e.g. P6KE440CA).
Electrical characteristics apply in both directions.
Note
•
P6KE250A to P6KE540A and P6KE250CA to P6KE440CA for
commercial grade only
Polarity: for uni-directional types the color band denotes
cathode end, no marking on bi-directional types
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
PPPM
IPPM
VALUE
600
UNIT
W
Peak pulse power dissipation with a 10/1000 μs waveform (1) (fig. 1)
Peak pulse current with a 10/1000 μs waveform (1)
See next table
5.0
A
Power dissipation on infinite heatsink at TL = 75 °C (fig. 5)
Peak forward surge current 8.3 ms single half sine-wave (2)
Maximum instantaneous forward voltage at 50 A for uni-directional only (3)
Operating junction and storage temperature range
PD
W
IFSM
100
A
VF
3.5/5.0
V
TJ, TSTG
- 55 to + 175
°C
Notes
(1)
Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2
Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum
VF = 3.5 V for P6KE220A and below; VF = 5.0 V for P6KE250A and above
(2)
(3)
Revision: 03-Mar-2020
Document Number: 88369
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000