POWER 600Watts
VOLTAGE 6.8 to 440 Volts
P6KE6.8 THRU P6KE440CA
Features
· Plastic package has Underwriters Laboratory Flammability
Classification 94V-0
· Glass passivated junction
DO-15
· 600W peak pulse power capability with a 10/100μS
waveform, reptition rate(duty cycle) : 0.01%
· Excellent clamping capability
0.140(3.6)
0.104(2.6)
DIA.
· Low incremental surge resistance
1.0(25.4)
MIN.
· Fast response time : typically less than 1.0ps from 1 Volts to
V(BR) for uni-directional and 5.0ns for Bi-directional types
· Typical ID less than 1.0μA above 10V
· High temperature soldering guaranteed : 265℃/10seconds,
0.375"(9.5mm) lead length, 5lbs. (2.3kg) tension
0.300(7.6)
0.230(5.8)
Mechanical Data
· Case : DO-15 molded plastic body over passivated junction
· Terminals : Solder plated axial leads, solderable per
MIL-STD-750, method 2026
· Polarity : For uni-directional types the color band denotes
cathode end. which is positive with respect to the
anode under normal TVS operation
1.0(25.4)
MIN.
0.034(0.9)
0.028(0.7)
DIA.
Dimensions in inches and (millimeters)
· Mounting Position : Any
· Weight : 0.014 ounce, 0.33 gram
Devices For Bidirectional Applications
· For bi-directional use C or CA suffix for types P6KE7.5 thru types P6KE440CA(e.g. P6KE10C, P6KE220CA),
electrical characteristics apply in both directions.
Maximum Ratings And Electrical Characteristics
(Ratings at 25℃ ambient temperature unless otherwise specified)
Symbols
Values
Units
Peak power dissipation with a 10/1000μS waveform (Note 1. Fig. 3)
Peak pulse current with a 10/1000μS waveform (Note 1)
P
PPM
PPM
M(AV)
Min.600
See Table 1
5.0
Watts
Amps
Watts
I
Steady state power dissipation at T
L
=75℃ lead length 0.375"(9.5mm) (Note2)
P
Peak forward surge current, 8.3mm single half sine-wave superimposed on
rated load(JEDEC method) undirectional (Note 3)
IFSM
100.0
Amps
Maximum instantaneous forward voltage at 50A for unidirectional only(Note4)
Operating junction and storage temperature range
V
F
3.5/50
Volts
℃
TJ
,TSTG
-55 to +175
Notes:
(1) Non repetitive current pulse, per Fig.3 and derated above T
(2) Mounted on copper pads area of 1.6×1.6"(40×40mm) per Fig.5
(3) Measured on 8.3ms single half sine-wave or equivalent square wave, duty cycle=4 pulse per minute maximum
(4) V =3.5 Volts max. for devices of V(BR)≤220V, and V =5.0 Volts max. for devices of V(BR)>220V
A=25℃ per Fig.2
F
F