POWER 400Watts
VOLTAGE 6.8 to 440 Volts
P4KE6.8 THRU P4KE440CA
Features
· Plastic package has Underwriters Laboratory Flammability
Classification 94V-0
· Glass passivated junction
DO-41
· 400W peak pulse power capability with a 10/100μS
waveform, reptition rate(duty cycle) : 0.01%
· Excellent clamping capability
0.107(2.7)
0.080(2.0)
DIA.
· Low incremental surge resistance
· Fast response time : typically less than 1.0ps from 1 Volts to
1.0(25.4)
MIN.
V
(BR) for uni-directional and 5.0ns for Bi-directional types
>
· Devices with V(BR) 10V, I
D
are typically less than 1.0
μA
· High temperature soldering guaranteed : 265
0.375"(9.5mm) lead length, 5lbs. (2.3kg) tension
℃
/10seconds,
0.205(5.2)
0.166(4.2)
Mechanical Data
· Case : DO-41 molded plastic body over passivated junction
· Terminals : Solder plated axial leads, solderable per
MIL-STD-750, method 2026
· Polarity : For uni-directional types the color band denotes
cathode end. which is positive with respect to the
anode under normal TVS operation
1.0(25.4)
MIN.
0.034(0.9)
0.028(0.7)
DIA.
Dimensions in inches and (millimeters)
· Mounting Position : Any
· Weight : 0.012 ounce, 0.34 gram
Devices For Bidirectional Applications
· For bi-directional use C or CA suffix for types P4KE7.5 thru types P4KE440CA(e.g. P4KE10C, P4KE220CA),
electrical characteristics apply in both directions.
Maximum Ratings And Electrical Characteristics
(Ratings at 25℃ ambient temperature unless otherwise specified)
Symbols
Values
Units
Peak power dissipation with a 10/100μS waveform (Note 1. Fig. 3)
Peak pulse current with a 10/100μS waveform (Note 1)
P
PPM
PPM
M(AV)
Min.400
Watts
I
See Table 1
1.0
Amps
Watts
Steady state power dissipation at T
L=75℃ lead length 0.375"(9.5mm) (Note2)
P
Peak forward surge current, 8.3mm single half sine-wave superimposed on
rated load(JEDEC method) (Note 3)
I
FSM
40.0
Amps
Maximum instantaneous forward voltage at 25A for unidirectional only(Note4)
Operating junction and storage temperature range
V
F
3.5/50
Volts
℃
TJ
,TSTG
-55 to +175
Notes:
(1) Non repetitive current pulse, per Fig.3 and derated above T
(2) Mounted on copper pads area of 1.6×1.6"(40×40mm) per Fig.5
(3) Measured on 8.3ms single half sine-wave or equivalent square wave, duty cycle=4 pulse per minute maximum
(4) V =3.5 Volts max. for devices of V(BR)≤220V, and V =5.0 Volts max. for devices of V(BR)>220V
A=25℃ per Fig.2
F
F