5秒后页面跳转
P4KE100ATR PDF预览

P4KE100ATR

更新时间: 2024-11-09 19:02:31
品牌 Logo 应用领域
美高森美 - MICROSEMI 局域网二极管
页数 文件大小 规格书
4页 214K
描述
Trans Voltage Suppressor Diode, 400W, 85.5V V(RWM), Unidirectional, 1 Element, Silicon, DO-204AL, PLASTIC, DO-41, 2 PIN

P4KE100ATR 技术参数

是否Rohs认证: 不符合生命周期:Obsolete
零件包装代码:DO-41包装说明:PLASTIC, DO-41, 2 PIN
针数:2Reach Compliance Code:unknown
ECCN代码:EAR99HTS代码:8541.10.00.50
风险等级:5.04最大击穿电压:105 V
最小击穿电压:95 V击穿电压标称值:100 V
外壳连接:ISOLATED最大钳位电压:137 V
配置:SINGLE二极管元件材料:SILICON
二极管类型:TRANS VOLTAGE SUPPRESSOR DIODEJEDEC-95代码:DO-204AL
JESD-30 代码:O-PALF-W2JESD-609代码:e0
湿度敏感等级:1最大非重复峰值反向功率耗散:400 W
元件数量:1端子数量:2
封装主体材料:PLASTIC/EPOXY封装形状:ROUND
封装形式:LONG FORM峰值回流温度(摄氏度):NOT SPECIFIED
极性:UNIDIRECTIONAL最大功率耗散:1.13 W
认证状态:Not Qualified最大重复峰值反向电压:85.5 V
子类别:Transient Suppressors表面贴装:NO
技术:AVALANCHE端子面层:TIN LEAD
端子形式:WIRE端子位置:AXIAL
处于峰值回流温度下的最长时间:NOT SPECIFIEDBase Number Matches:1

P4KE100ATR 数据手册

 浏览型号P4KE100ATR的Datasheet PDF文件第2页浏览型号P4KE100ATR的Datasheet PDF文件第3页浏览型号P4KE100ATR的Datasheet PDF文件第4页 
P4KE6.8 thru P4KE400CA, e3  
400 Watt Transient Voltage Suppressor  
S C O T T S D A L E D I V I S I O N  
DESCRIPTION  
APPEARANCE  
This 400 W Transient Voltage Suppressor (TVS) series is an economical  
molded axial-leaded package to protect voltage-sensitive components from  
destructive or partial degradation. They are available in both unidirectional  
or bi-directional configurations as well as RoHS Compliant (annealed  
matte-Tin finish) with an e3 suffix added to the part number. They have a  
peak pulse power rating of 400 watts for a 10/1000 µs as depicted in  
Figures 1 and 2. The nominal breakdown voltages (VBR) in this series  
extend from 6.8 to 400 volts. Microsemi also offers a broad spectrum of  
additional TVSs to meet your needs.  
DO-41  
(DO-204AL)  
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com  
FEATURES  
APPLICATIONS / BENEFITS  
Economical series for thru-hole mounting  
Suppresses transients up to 400 watts @ 10/1000 μs  
(see Figure 1)  
Available in both unidirectional and bi-directional (add C  
or CA suffix to part number for bidirectional)  
Protects sensitive components such as IC’s, CMOS,  
Bipolar, BiCMOS, ECL, DTL, T2L, etc.  
Voltages from 6.8 to 400 V Breakdown (VBR  
)
Protection from switching transients & induced RF  
Fast Response  
Compliant to IEC61000-4-2 and IEC61000-4-4 for  
ESD and EFT protection respectively  
Optional 100% screening for avionics grade is  
available by adding MA prefix to part number for added  
100% temperature cycle -55oC to +125oC (10X) as well  
as surge (3X) and 24 hours HTRB with post test VZ &  
IR (in the operating direction for unidirectional or both  
directions for bidirectional)  
Secondary lightning protection per IEC61000-4-5  
with 42 Ohms source impedance:  
Class 1: P4KE5.0 to P4KE91A or CA  
Class 2: P4KE5.0 to P4KE47A or CA  
Class 3: P4KE5.0 to P4KE24A or CA  
Class 4: P4KE5.0 to P4KE12A or CA  
Options for screening in accordance with MIL-PRF-  
19500 for JAN, JANTX, JANTXV, or JANS are  
available by adding MQ, MX, MV, or MSP prefixes  
respectively to part numbers  
Secondary lightning protection per IEC61000-4-5  
with 12 Ohms source impedance:  
RoHS Compliant devices avaialbe by adding “e3” suffix  
Class 1: P4KE5.0 to P4KE30A or CA  
Class 2: P4KE5.0 to P4KE15A or CA  
Surface mount equivalents available as SMAJP4KE6.8  
to SMAJP4KE400CA  
Moisture classification is Level 1 with no dry pack  
required per IPC/JEDEC J-STD-020B  
MAXIMUM RATINGS  
MECHANICAL AND PACKAGING  
Operating and Storage Temperature: -65°C to +150°C  
Peak Pulse Power: 400 Watts at 10/1000 μs (see Figure  
1, 2 and 3 for tW, waveform and derating effects)  
CASE: Void-free transfer molded thermosetting  
epoxy body meeting UL94V-0  
FINISH: Tin-Lead or RoHS Compliant annealed  
matte-Tin plating readily solderable per MIL-STD-  
750, method 2026  
Impulse repetition rate (duty factor): 0.01%  
Thermal Resistance: 50°C/W junction to leads @ 3/8  
inch (10 mm) from body, or 110°C/W junction to ambient  
when mounted on FR4 PC board with 4 mm2 copper  
pads (1oz) and track width 1 mm, length 25 mm  
MARKING: Body marked with part number  
POLARITY: Band denotes cathode. Bidirectional  
not marked  
WEIGHT: 0.3 grams (approximate)  
Steady-State Power: 2.5 Watts @ TL=25°C at 3/8 inch  
(10 mm) from body, or 1.13 W at TA = 25ºC on FR4 PC  
board described for thermal resistance  
TAPE & REEL option: Standard per EIA-296 (add  
“TR” suffix to part number)  
Forward Voltage at 25°C: 3.5 V @ 30 A with 8.3 ms half-  
See package dimensions on last page  
sine wave (unidirectional only)  
Solder temperatures: 260 °C for 10 s (maximum)  
Copyright © 2005  
8-04-2005 REV C  
Microsemi  
Page 1  
Scottsdale Division  
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503  

与P4KE100ATR相关器件

型号 品牌 获取价格 描述 数据表
P4KE100AU06 RECTRON

获取价格

Trans Voltage Suppressor Diode, Unidirectional, 1 Element, Silicon, DO-41,
P4KE100-B MCC

获取价格

Transient Suppressor,
P4KE100C SEMTECH

获取价格

TRANSIENT VOLTAGE SUPPRESSORS
P4KE100C COMCHIP

获取价格

400W Transient Voltage Suppressor
P4KE100C HY

获取价格

GLASS PASSIVATED UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS
P4KE100C WTE

获取价格

400W TRANSIENT BOLTAGE SUPPRESSORS
P4KE100C PANJIT

获取价格

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR(VOLTAGE - 6.8 TO 440 Volts 400 Watt
P4KE100C TRSYS

获取价格

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR
P4KE100C CHENG-YI

获取价格

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR
P4KE100C LITTELFUSE

获取价格

功能与特色: 无卤素,且符合RoHS标准 塑料封装 DO-41包装内有钝化玻璃芯片接合点