P3T1035xUK/P3T2030xUK
I3C, I2C-bus, 0.5 °C accuracy, digital temperature sensor
Rev. 1.1 — 10 November 2023
Product data sheet
1 General description
The P3T1035xUK/P3T2030xUK is a temperature-to-digital converter from -40 °C to +125 °C range. It uses an
on-chip band gap temperature sensor and A-to-D conversion technique with an overtemperature detection.
The device contains a number of data registers: Configuration (Conf) stores the device settings such as device
operation mode, and temperature register (Temp) stores the digital temp reading, which communicates by a
controller via the 2-wire serial I3C/I2C-bus interface.
The P3T1035xUK/P3T2030xUK can be configured for different operation conditions. It can be set in normal
mode to monitor periodically the ambient temperature, or in shutdown mode to minimize power consumption.
The temperature register always stores a 12-bit two's complement data (2 Bytes), giving a temperature
resolution of 0.0625 °C. It also allows 8-bit (MSByte) reading with temperature resolution of 1 °C.
In I2C mode, the P3T1035xUK/P3T2030xUK supports global read/write operations that allow the controller
to access multiple devices simultaneously. It does not require the controller to access each P3T1035xUK/
P3T2030xUK individually.
The P3T1035xUK offers the accuracy ±0.5 °C from 0 °C to +70 °C at VCC ≥ 1.62 V.
The P3T2030xUK offers the accuracy ±2 °C from -40 °C to +125 °C at VCC ≥ 1.62 V.
See detailed description of accuracy vs temperature and VCC range in Section 2 and Table 27.
The P3T1035xUK/P3T2030xUK is available in WLCSP4 package and has 8 factory-programmed device
address options.
2 Features and benefits
• I3C and I2C interface
• Supply range: 1.4 V to 1.98 V
• Eight different device addresses (A through H) are available
• Programmable undertemperature and overtemperature registers
• Resolution: 12 bits (0.0625 °C); supports 8-bit reading
• Accuracy: P3T1035xUK
– 1.62 V ≤ VCC ≤ 1.98 V
– ±0.5 °C (maximum) from 0 °C to +70 °C
– ±1 °C (maximum) from -40 °C to +125 °C
– 1.4 V ≤ VCC < 1.62 V
– ±2 °C (maximum) from -20 °C to +100 °C
– ±3 °C (maximum) from -40 °C to +125 °C
• Accuracy: P3T2030xUK
– 1.62 V ≤ VCC ≤ 1.98 V
– ±2 °C (maximum) from -40 °C to +125 °C
– 1.4 V ≤ VCC < 1.62 V
– ±2 °C (maximum) from -20 °C to +100 °C
– ±3 °C (maximum) from -40 °C to +125 °C