OPA361
SBOS334A − SEPTEMBER 2005 − REVISED JANUARY 2006
3V VIDEO AMPLIFIER
with Internal Gain and Filter in SC70
FD EATURES
DESCRIPTION
EXCELLENT VIDEO PERFORMANCE
INTERNAL GAIN: 5.2V/V
The OPA361 high-speed amplifier is optimized for 3V
portable video applications. It is specifically designed to be
compatible with the video encoders embedded in Texas
Instruments’ OMAP2420 and DaVinci processors or other
D
D
D
SUPPORTS TV-DETECTION
COMPATIBLE WITH OMAP242x and
application processors with 0.5V video output. The input
PP
DAVINCIE PROCESSORS
common-mode range includes GND, which allows a
video-DAC (digital-to-analog converter) to be DC-coupled
to the OPA361. The TV-detection feature simplifies the
end-user interface significantly by facilitating the
automatic start/stop of video transmission.
D
2-POLE RECONSTRUCTION FILTER
D
INPUT RANGE INCLUDES GROUND
− DC-Coupled Input
D
INTEGRATED LEVEL SHIFTER
− DC-Coupled Output
− No Output Capacitors Needed
(1)
The output swings within 5mV of GND and 250mV to V+
with a standard back-terminated video load (150Ω). An
internal level shift circuit prevents the output from
saturating with 0V input, thus preventing sync-pulse
clipping in common video circuits. Therefore, the OPA361
is ideally suited for DC-coupling to the video load.
D
D
D
D
D
RAIL-TO-RAIL OUTPUT
LOW QUIESCENT CURRENT: 5.3mA
SHUTDOWN CURRENT: 1.5mA
SINGLE-SUPPLY: 2.5V to 3.3V
SC70-6 PACKAGE: 2.0mm x 2.1mm
RoHS COMPLIANT
The OPA361 has been optimized for space-sensitive
applications by integrating internal gain setting resistors
(G = 5.2V/V) and a 2-pole video-DAC reconstruction filter.
D
(1)
In shutdown mode, the quiescent current is reduced to
< 1.5µA, dramatically reducing power consumption and
prolonging battery life.
Internal circuitry avoids output saturation, even with 0V sync tip
level at the input video signal.
AD PPLICATIONS
The OPA361 is available in the tiny 2mm x 2.1mm SC70-6
package.
CAMERA PHONES
V+
RELATED LOW VOLTAGE VIDEO AMPS
OPA361
10mV
FEATURES
PRODUCT
OPA358
OPA360
2−Pole
Filter
+In
Ω
75
2.7V to 3.3V, 70MHz, 6mA I , 5µA Sleep, SC70
Q
Out
Ω
500
2.7V to 3.3V, Filter, SAG, G = 2, 5µA Sleep, SC70
2.7V to 5.5V, 200MHz, 300V/µs, 6µA Sleep, SOT23
2.7V to 5.5V, 100MHz, 150V/µs, 6µA Sleep, SOT23
OPA355
OPA357
RSET
Ω
4k
G = 5.2V/V
(see note 1)
Shutdown
Control
Enable
GND
(1) Closed when enabled during normal operation; open when shut down.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments
semiconductor products and disclaimers thereto appears at the end of this data sheet.
DAVINCI is a registered trademark of Texas Instruments. All other trademarks are the property of their respective owners.
ꢀꢁ ꢂ ꢃꢄ ꢅ ꢆꢇ ꢂꢈ ꢃ ꢉꢆꢉ ꢊꢋ ꢌꢍ ꢎ ꢏꢐ ꢑꢊꢍꢋ ꢊꢒ ꢓꢔ ꢎ ꢎ ꢕꢋꢑ ꢐꢒ ꢍꢌ ꢖꢔꢗ ꢘꢊꢓ ꢐꢑꢊ ꢍꢋ ꢙꢐ ꢑꢕꢚ ꢀꢎ ꢍꢙꢔ ꢓꢑꢒ
ꢓ ꢍꢋ ꢌꢍꢎ ꢏ ꢑꢍ ꢒ ꢖꢕ ꢓ ꢊ ꢌꢊ ꢓ ꢐ ꢑꢊ ꢍꢋꢒ ꢖ ꢕꢎ ꢑꢛꢕ ꢑꢕ ꢎ ꢏꢒ ꢍꢌ ꢆꢕꢜ ꢐꢒ ꢇꢋꢒ ꢑꢎ ꢔꢏ ꢕꢋꢑ ꢒ ꢒꢑ ꢐꢋꢙ ꢐꢎ ꢙ ꢝ ꢐꢎ ꢎ ꢐ ꢋꢑꢞꢚ
ꢀꢎ ꢍ ꢙꢔꢓ ꢑ ꢊꢍ ꢋ ꢖꢎ ꢍ ꢓ ꢕ ꢒ ꢒ ꢊꢋ ꢟ ꢙꢍ ꢕ ꢒ ꢋꢍꢑ ꢋꢕ ꢓꢕ ꢒꢒ ꢐꢎ ꢊꢘ ꢞ ꢊꢋꢓ ꢘꢔꢙ ꢕ ꢑꢕ ꢒꢑꢊ ꢋꢟ ꢍꢌ ꢐꢘ ꢘ ꢖꢐ ꢎ ꢐꢏ ꢕꢑꢕ ꢎ ꢒꢚ
Copyright 2005, Texas Instruments Incorporated
www.ti.com