OPA361-Q1
www.ti.com
SBOS552 –MARCH 2011
3V Video Amplifier with Internal Gain and Filter in SC70
Check for Samples: OPA361-Q1
1
FEATURES
DESCRIPTION
The OPA361-Q1 high-speed amplifier is optimized for
3V portable video applications. It is specifically
designed to be compatible with the video encoders
embedded in Texas Instruments’ OMAP2420 and
DaVinci processors or other application processors
with 0.5VPP video output. The input common-mode
range includes GND, which allows a video-DAC
(digital-to-analog converter) to be DC-coupled to the
OPA361-Q1. The TV-detection feature simplifies the
end-user interface significantly by facilitating the
automatic start/stop of video transmission.
•
•
•
•
•
Qualified for Automotive Applications
Excellent Video Performance
Internal Gain: 5.2V/V
Supports TV-Detection
Compatible with OMAP242x and
DAVINCI™ Processors
•
•
2-Pole Reconstruction Filter
Input Range Includes Ground
–
DC-Coupled Input
The output swings within 5mV of GND and 250mV to
V+ with a standard back-terminated video load
(150Ω). An internal level shift circuit prevents the
output from saturating with 0V input, thus preventing
sync-pulse clipping in common video circuits.
Therefore, the OPA361-Q1 is ideally suited for
DC-coupling to the video load.
•
Integrated Level Shifter
–
–
DC-Coupled Output(1)
No Output Capacitors Needed
•
•
•
•
•
Rail-to-Rail Output
Low Quiescent Current: 5.3mA
Shutdown Current: 1.5µA
Single-Supply: 2.5V to 3.3V
SC70-6 Package: 2.0mm × 2.1mm
RoHS Compliant
The OPA361-Q1 has
been optimized for
space-sensitive applications by integrating internal
gain setting resistors (G = 5.2V/V) and a 2-pole
video-DAC reconstruction filter.
•
(1)
In shutdown mode, the quiescent current is reduced
to < 1.5µA, dramatically reducing power consumption
and prolonging battery life.
Internal circuitry avoids output saturation, even with 0V sync
tip level at the input video signal.
V+
The OPA361-Q1 is available in the tiny 2mm ×
2.1mm SC70-6 package.
OPA361
10mV
2-Pole
+In
75Ω
Filter
Out
Ω
500
RSET
Ω
4k
G =5.2V/V
Shutdown
Control
(see note 1)
Enable
GND
(1) Closed when enabled during normal
operation; open when shut down.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2011, Texas Instruments Incorporated