OPA2631
OPA2631
www.ti.com
TM
Dual, Low-Power, Single-Supply
OPERATIONAL AMPLIFIER
DESCRIPTION
FEATURES
The OPA2631 is a dual, low-power, voltage-feedback
amplifier designed to operate on a single +3V or +5V
supply. Operation on ±5V or +10V supplies is also
supported. The input range extends below ground and
to within 1V of the positive supply. Using comple-
mentary common-emitter outputs provides an output
swing to within 30mV of ground and 130mV of the
positive supply. The high output drive current and low
differential gain and phase errors also make it ideal for
single-supply consumer video products.
● HIGH BANDWIDTH: 75MHz (G = +2)
● LOW SUPPLY CURRENT: 6mA/chan
● +3V TO +10V SUPPLY OPERATION
● INPUT RANGE INCLUDES GROUND
● 4.8V OUTPUT SWING ON +5V SUPPLY
● HIGH SLEW RATE: 100V/µs
● LOW INPUT VOLTAGE NOISE: 6nV/√Hz
Low-distortion operation is ensured by the high gain
bandwidth product (68MHz) and slew rate (100V/µs),
making the OPA2631 an ideal input buffer stage to 3V
and 5V CMOS converters. Unlike other low-power,
single-supply amplifiers, distortion performance im-
proves as the signal swing is decreased. A low
6nV/√Hz input voltage noise supports wide dynamic-
range operation.
APPLICATIONS
● DIFFERENTIAL RECEIVERS/DRIVERS
● ACTIVE FILTERS
● MATCHED I AND Q CHANNEL AMPLIFIERS
● CCD IMAGING CHANNELS
● LOW POWER ULTRASOUND
● PORTABLE CONSUMER ELECTRONICS
The OPA2631 is available in an industry standard
SO-8 package. Where a single-channel, single-supply
operational amplifier is required, consider the OPA631
and OPA632. Where higher full-power bandwidth and
lower distortion are required, consider the OPA2634.
SPICE model available at www.ti.com
+3V
2.26kΩ
+3V
RELATED PRODUCTS
374Ω
DESCRIPTION
SINGLES
DUALS
VIN
100Ω
ADS901
10-Bit
20Msps
1/2
OPA2631
Medium Speed, No Disable
With Disable
OPA631
OPA632
OPA2631
—
High Speed, No Disable
With Disable
OPA634
OPA635
OPA2634
—
22pF
562Ω
750Ω
Copyright © 1999, Texas Instruments Incorporated
SBOS067A
Printed in U.S.A. February, 2001