Catalog 1308242
Issued 3-03
OEG
OMIT series
10A Miniature
Pow er PC Board Relay
Appliances, HVAC, Office Machines.
UL File No. E58304
CSA File No. LR48471
VDE File No. 6678
SEMKO File No. 8713114
SEV File No. 97550375
Users should thoroughly review the technical data before selecting a product part
number. It is recommended that user also seek out the pertinent approvals files of
the agencies/laboratories and review them to ensure the product meets the
requirements for a given application.
Coil Data @ 20°C
OMIT-L Sensitive
Features
Rated Coil
Voltage
(VDC)
Nom inal
Current
(m A)
Coil
Resistance
(ohm s) ± 10%
Must Operate Must Release
• Meet UL 508, VDE0435, SEMKO and SEV requirements.
• 1 Form A contact arrangements.
• UL TV-5 rating available.
Voltage
(VDC)
Voltage
(VDC)
• Immersion cleanable, sealed version available.
• Meet 5,000V dielectric voltage between coil and contacts.
• Meet 10,000V surge voltage between coil and contacts (1.2 / 50µs).
5
6
9
12
24
48
106.4
88.0
58.0
44.4
21.8
10.9
47
68
155
270
1,100
4,400
3.75
4.50
6.75
9.00
18.00
36.00
0.25
0.30
0.45
0.90
1.20
2.40
Contact Data @ 20°C
Arrangem ents: 1 Form A.
Material: AgSnO
Max. Sw itching Rate: 300 ops./min. (no load).
OMIT-D Standard
Rated Coil
Voltage
(VDC)
Nom inal
Current
(m A)
Coil
Must Operate Must Release
Resistance
(ohm s) ± 10%
Voltage
(VDC)
Voltage
(VDC)
30 ops./min. (rated load).
Expected Mechanical Life: 10 million operations (no load).
Expected Electrical Life: 100,000 operations (rated load).
Minim um Load: 100mA @ 5VDC.
5
6
9
12
24
48
138.9
120.0
78.3
60.0
29.3
14.5
36
50
115
200
820
3.50
4.20
6.30
8.40
16.80
33.60
0.25
0.30
0.45
0.90
1.20
2.40
Initial Contact Resistance: 100 milliohms @ 1A, 6VDC.
3,300
Contact Ratings
Operate Data
Must Operate Voltage:
OMIT-D: 70% of nominal voltage or less.
OMIT-L: 75% of nominal voltage or less.
Must Release Voltage: 5% of nominal voltage or more.
Operate Tim e: OMIT-D: 15 ms max.
OMIT-L: 20 ms max.
Ratings: 10A @ 240VAC resistive,
TV-5 @ 120VAC tungsten 25,000ops.
Max. Sw itched Voltage: AC: 240V.
DC: 30V.
Max. Sw itched Current: 10A.
Max. Sw itched Pow er: 2,400VA, 300W.
Release Tim e: 8 ms max.
Initial Dielectric Strength
Environm ental Data
Tem perature Range:
Operating: OMT-D:
Betw een Open Contacts: 1,000VAC 50/60 Hz. (1 minute).
Betw een Coil and Contacts: 5,000VAC 50/60 Hz. (1 minute).
Surge Voltage Betw een Coil and Contacts: 10,000V (1.2 / 50µs).
-30°C to +55°C
OMT-L:
-30°C to +70 °C
Vibration, Mechanical: 10 to 55 Hz., 1.5mm double amplitude
Operational: 10 to 55 Hz., 1.5mm double amplitude.
Shock, Mechanical: 1,000m/s2 (100G approximately).
Operational: 100m/s2 (10G approximately).
Operating Hum idity: 20 to 85% RH. (Non-condensing).
Initial Insulation Resistance
Betw een Mutually Insulated Elem ents: 1,000M ohms min. @ 500VDC.
Coil Data
Voltage: 5 to 48VDC.
Mechanical Data
Nom inal Pow er: 720 mW (OMI-D), 540mW (OMI-L).
Coil Tem perature Rise: 45°C max., at rated coil voltage (OMI-D).
35°C max., at rated coil voltage (OMI-L).
Max. Coil Pow er: 130% of nominal.
Duty Cycle: Continuous.
Term ination: Printed circuit terminals.
Enclosure (94V-0 Flam m ability Ratings):
OMIT-SS: Vented (Flux-tight) plastic cover.
OMIT-SH: Sealed plastic case.
Weight: 0.46 oz (13g) approximately.
Dimensions are shown for
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
464