OCP7190
1 Watt Audio Power Amplifier
General Description
Key Specifications
z
z
z
z
PSRR at 217Hz, VDC=5V (Fig.1)
Power Output at 5.0V & 1% THD
Power Output at 3.3V & 1% THD
Shutdown Current
62dB(typ.)
1W(typ.)
400mW(typ.)
0.1µA(typ.)
The OCP7190 is an audio power amplifier primarily
designed for demanding applications in mobile
phones and other portable communication device
applications. It is capable of delivering 1 watt of
continuous average power to an 8Ω BTL load with less
than 1% distortion (THD+N) from a 5VDC power
supply.
Audio power amplifiers were designed specifically to
provide high quality output power with a minimal
amount of external components. The OCP7190 does
not require output coupling capacitors or bootstrap
capacitors, and therefore is ideally suited for mobile
phone and other low voltage applications where
minimal power consumption is a primary requirement.
Features
z
Available in space-saving packages: micro SMD,
MSOP
z
Ultra low current shutdown mode
z
z
BTL output can drive capacitive loads
Improved pop and click circuitry eliminates noises
during turn-on and turn-off transitions
z
z
2.2V - 5.5V operation
No output coupling capacitors, snubber networks
or bootstrap capacitors required
Thermal shutdown protection
Unity-gain stable
The OCP7190 features a low-power consumption
shutdown mode, which is achieved by driving the
shutdown pin with logic low. Additionally, the
OCP7190 features an internal thermal shutdown
protection mechanism.
z
z
z
External gain configuration capability
The OCP7190 contains advanced pop and click
circuitry which eliminates noises which would
otherwise occur during turn-on and turn-off transitions.
The OCP7190 is unity-gain stable and can be
configured by external gain-setting resistors.
Applications
z
z
z
Mobile Phones
PDA
Portable electronic devices
Pin Configuration
1) 9 Bump micro SMD
(Top View)
2) MSOP8L
(Top View)
Page1 - 25
Rev. 1.0 Jun. 16, 2006