QUARTZ
EURO
OCXO - OC14E12A SERIES
AT-Cut Crystal OCXO - Sinewave - 12.0 Volts
For high stability STRATUM 2 applications
Low Jitter
<±0.6ppm overall frequency tolerance over 15 years
Full size 14 pin dual-in-line package
Supply Voltage 12.0 Volts
AT-Cut Crystal
·
EFC (Voltage control) as standard
OUTLINE & DIMENSIONS
DESCRIPTION
OC14E12A series oven-controlled crystal oscillators are intended for
Stratum 2 applications requiring low jitter and tight stability <0.6ppm
overall frequency tolerance over 15 years.
SPECIFICATION
Crystal Cut:
AT-cut
Output Waveform:
Supply Voltage:
Frequency Range:
Initial Calibration Tolerance:
Frequency Stability
over 0° to +60°C:
Sinewave
+12.0 VDC ±0.5V
10.0MHz
±0.5ppm maximum
±0.2ppm typical
±0.05ppm available
±0.3ppm typical
±0.1ppm available
±0.5ppm typical
over -20° to +70°C:
over -40° to +85°C:
±0.2ppm available
<0.1ppm for ±0.5V change
±0.7ppm first year
<±4ppm over 10 years
<0.01ppm for ±5% change
vs. Voltage Change:
vs. Ageing:
TEST CIRCUIT
vs. Load Change:
Warm-up Time:
3 minutes maximum
Voltage Control
CON
Control Voltage Centre:
Freq. Deviation Range:
Control Voltage Range:
Transfer Function:
+2.5 Volts (V
)
±4.0ppm min., ref. to 25°C
0V to +5.0Volts
Positive: Increasing control
voltage increases output
frequency.
Input Impedance:
EFC Linearity:
47k minimum
±10% maximum
Power Dissipation:
1.0W max. at steady state
2.0W max. at turn on
PART NUMBER FORMAT
Example:
Output
Output Level:
Harmonics:
Spurious:
+3dBm (typ.) into 50 load
-10dBc minimum
-70dBc minimum
OC14GE12A-10.000-0.10/-20+70
Envionmental
Storage Temperature:
Shock:
OCXO Package: OC14
RoHS Compliance
-65° to +125°C
2000g, 0.3ms ½ sine
10 ~2000Hz / 10g
G: RoHS Compliant
Blank: Non-compliant
Vibration:
E: Output Sinewave
12: Supply Voltage 12.0Volts
A: AT-Cut crystal
Nominal Frequency 10.0MHz
Stability in ppm
PHASE NOISE (at 10MHz)
Operating Temperature Range °C
Lowest Temperature/Highest Temperature
Offset
1Hz
dBc/Hz
-70
10Hz
-100
100Hz -130
1kHz
10kHz
-140
-145
EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE
Tel: +44 (0)1460 230000 Fax: +44 (0)1460 230001 Email: info@euroquartz.co.uk www.euroquartz.co.uk