5秒后页面跳转
NTB0101GW PDF预览

NTB0101GW

更新时间: 2024-11-02 21:21:31
品牌 Logo 应用领域
恩智浦 - NXP 驱动光电二极管接口集成电路驱动器
页数 文件大小 规格书
26页 241K
描述
LINE TRANSCEIVER, PDSO6, PLASTIC, SOT-363, SC-88, 6 PIN

NTB0101GW 技术参数

是否Rohs认证: 符合生命周期:Not Recommended
零件包装代码:SOT-363包装说明:TSSOP,
针数:6Reach Compliance Code:unknown
ECCN代码:EAR99HTS代码:8542.39.00.01
风险等级:5.62差分输出:NO
驱动器位数:1输入特性:SCHMITT TRIGGER
接口集成电路类型:LINE TRANSCEIVER接口标准:GENERAL PURPOSE
JESD-30 代码:R-PDSO-G6长度:2 mm
湿度敏感等级:1功能数量:1
端子数量:6最高工作温度:125 °C
最低工作温度:-40 °C封装主体材料:PLASTIC/EPOXY
封装代码:TSSOP封装形状:RECTANGULAR
封装形式:SMALL OUTLINE, THIN PROFILE, SHRINK PITCH峰值回流温度(摄氏度):260
认证状态:Not Qualified最大接收延迟:14.2 ns
接收器位数:1座面最大高度:1.1 mm
最大供电电压:3.6 V最小供电电压:1.2 V
标称供电电压:1.5 V电源电压1-最大:5.5 V
电源电压1-分钟:1.65 V电源电压1-Nom:1.8 V
表面贴装:YES温度等级:AUTOMOTIVE
端子面层:Pure Tin (Sn)端子形式:GULL WING
端子节距:0.65 mm端子位置:DUAL
处于峰值回流温度下的最长时间:30最大传输延迟:14.2 ns
宽度:1.25 mmBase Number Matches:1

NTB0101GW 数据手册

 浏览型号NTB0101GW的Datasheet PDF文件第2页浏览型号NTB0101GW的Datasheet PDF文件第3页浏览型号NTB0101GW的Datasheet PDF文件第4页浏览型号NTB0101GW的Datasheet PDF文件第5页浏览型号NTB0101GW的Datasheet PDF文件第6页浏览型号NTB0101GW的Datasheet PDF文件第7页 
NTB0101  
Dual supply translating transceiver; auto direction sensing;  
3-state  
Rev. 4 — 6 August 2012  
Product data sheet  
1. General description  
The NTB0101 is a 1-bit, dual supply translating transceiver with auto direction sensing,  
that enables bidirectional voltage level translation. It features two 1-bit input-output ports  
(A and B), one output enable input (OE) and two supply pins (VCC(A) and VCC(B)). VCC(A)  
can be supplied at any voltage between 1.2 V and 3.6 V and VCC(B) can be supplied at any  
voltage between 1.65 V and 5.5 V, making the device suitable for translating between any  
of the low voltage nodes (1.2 V, 1.5 V, 1.8 V, 2.5 V, 3.3 V and 5.0 V).  
Pins A and OE are referenced to VCC(A) and pin B is referenced to VCC(B). A LOW level at  
pin OE causes the outputs to assume a high-impedance OFF-state. This device is fully  
specified for partial power-down applications using IOFF. The IOFF circuitry disables the  
output, preventing the damaging backflow current through the device when it is powered  
down.  
2. Features and benefits  
Wide supply voltage range:  
VCC(A): 1.2 V to 3.6 V and VCC(B): 1.65 V to 5.5 V  
IOFF circuitry provides partial Power-down mode operation  
Inputs accept voltages up to 5.5 V  
ESD protection:  
HBM JESD22-A114E Class 2 exceeds 2500 V for A port  
HBM JESD22-A114E Class 3B exceeds 15000 V for B port  
MM JESD22-A115-A exceeds 200 V  
CDM JESD22-C101E exceeds 1500 V  
Latch-up performance exceeds 100 mA per JESD 78B Class II  
Multiple package options  
Specified from 40 C to +85 C and 40 C to +125 C  
 
 

与NTB0101GW相关器件

型号 品牌 获取价格 描述 数据表
NTB0101GW,125 NXP

获取价格

NTB0101 - Dual supply translating transceiver; auto direction sensing; 3-state TSSOP 6-Pin
NTB0102 NXP

获取价格

Dual supply translating transceiver; auto direction sensing ; 3-state
NTB0102DP NXP

获取价格

Dual supply translating transceiver; auto direction sensing ; 3-state
NTB0102DP,125 NXP

获取价格

NTB0102 - Dual supply translating transceiver; auto direction sensing; 3-state TSSOP 8-Pin
NTB0102DP-Q100 NXP

获取价格

Dual supply translating transceiver; auto direction sensing; 3-state
NTB0102DP-Q100H NXP

获取价格

NTB0102-Q100 - Dual supply translating transceiver; auto direction sensing; 3-state TSSOP
NTB0102GD NXP

获取价格

Dual supply translating transceiver; auto direction sensing ; 3-state
NTB0102GD-Q100 NXP

获取价格

LINE TRANSCEIVER
NTB0102GD-Q100H NXP

获取价格

NTB0102-Q100 - Dual supply translating transceiver; auto direction sensing; 3-state SON 8-
NTB0102GF NXP

获取价格

Dual supply translating transceiver; auto direction sensing ; 3-state