NSI1200C
High Reliability Reinforced
Isolated Amplifier
Datasheet (EN) 1.0
VDD1 monitoring
Product Overview
Input common-mode overvoltage detection
NSI1200C is a high-performance isolated amplifier with
output separated from input based on the NOVOSENSE
capacitive isolation technology. The device has a linear
differential input signal range of ±250mV (±320mV full-
scale). The differential input is ideally suited to shunt
resistor-based current sensing in high voltage
applications where isolation is required.
Operation Temperature: -40℃~125℃
RoHS-Compliant Packages:
SOP8(300mil), DUB8, SOP8(150mil)
Safety Regulatory Approvals
The device has a fixed gain of 8.0 and provides a
differential analog output.
UL recognition:
SOW8, DUB8: 5000Vrms for 1 minute per UL1577
SOP8: 3000Vrms for 1 minute per UL1577
The low offset and gain drift ensure the accuracy over the
entire temperature range. High common-mode transient
immunity ensures that the device is able to provide
accurate and reliable measurements even in the
presence of high-power switching such as in motor
control applications.
The fail-safe functions including input common-mode
overvoltage detection and missing VDD1 detection
simplify system-level design and diagnostics.
CQC certification per GB4943.1
CSA component notice 5A
DIN EN IEC 60747-17 (VDE 0884-17)
Applications
Shunt current monitoring
Motor Drives
Uninterruptible Power Suppliers
Solar Inverters
Key Features
Up to 5000Vrms Insulation voltage
±250mV linear Input Voltage Range
Fixed Gain: 8.0
Device Information
Part Number
Package
Body Size
NSI1200C-DSWVR
SOP8(300mil) 5.85mm × 7.50mm
NSI1200C-DDBR
NSI1200C-DSPR
DUB8
9.32mm × 6.40mm
Low Offset Error and Drift:
±0.5mV (Max), ±5μV/℃(Max)
Low Gain Error and Drift:
SOP8(150mil) 4.90mm × 3.90mm
Functional Block Diagrams
VDD2
VDD1
±0.3% (Max), ±30ppm/℃(Max)
Low Nonlinearity and Drift:
±0.05% (Max), ±1ppm/℃(Typ)
SNR: 72dB (Typ, BW=100kHz)
Wide bandwidth: 220kHz (Typ)
High CMTI: 125kV/μs (Typ)
System-Level Diagnostic Features:
VDD1 detection
Reference
TX
Retiming
and 4th
INP
INN
-
OUTP
OUTN
Order Active
Low-Pass
Filter
Σ-Δ modulator
RX
Reference
Oscillator
GND1
GND2
Figure 1. NSI1200C Block Diagram
Copyright © 2023, NOVOSENSE
Page 1