NRLCW Series
Large Can Aluminum Electrolytic Capacitors
FEATURES
RoHS
• LONG LIFE AT +105°C (3,000 HOURS)
Compliant
• HIGH RIPPLE CURRENT
includes all homogeneous materials
• HIGH DENSITY DESIGN
• SUITABLE FOR SWITCHING POWER SUPPLIES
*See Part Number System for Details
SPECIFICATIONS
Operating Temperature Range
-25 ~ +105°C
160 ~ 450Vdc
56 ~ 2,200μF
±20% (M)
Rated Voltage Range
Rated Capacitance Range
Capacitance Tolerance
Max. Leakage Current (μA)
After 5 minutes (20°C)
<3 * CV (μA)
W.V. (Vdc)
Tan δ max.
W.V. (Vdc)
160 180 200 220 250 315 350 385 400 420 450
0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.20 0.20
160 180 200 220 250 315 350 385 400 420 450
200 225 250 270 300 370 400 440 450 470 500
Max. Tan δ
at 120Hz/20°C
Surge Voltage
S.V. (Vdc)
Frequency (Hz)
50
120
1.00
1.00
60
300
1.15
1.16
70
1K
1.17
1.30
85
10K
1.20
1.41
105
50K
1.20
1.43
-
Ripple Current Frequency
Correction Factors
160 ~ 315Vdc
400 ~ 450Vdc
0.80
0.77
40
Multiplier
at 105°C
Temperature (°C)
Ripple Current Temperature
Correction Factors
Multiplier
W.V. (Vdc)
Z-25°C/+20°C
Capacitance Change
Tan δ
Leakage Current
Capacitance Change
Tan δ
Leakage Current
Capacitance Change
Tan δ
2.47
2.37
2.17
1.67
1.00
-
160 180 200 220 250 315 350 385 400 420 450
7
Low Temperature Stability
(Impedance Ratio)
Within ±20% of initial measured value
Less than 200% of specified maximum value
Less than specified maximum value
Within ±15% of initial measured value
Less than 150% of specified maximum value
Less than specified maximum value
Within ±15% of initial measured value
Less than specified maximum value
Less than specified maximum value
Within ±10% of initial measured value
Less than specified maximum value
Less than specified maximum value
Load Life Test
3,000 hours at +105°C
Shelf Life Test
1,000 hours at +105°C
(no load)
Surge Voltage Test 1,000 Cycles
30 seconds "On" and 5.5 minutes
"Off" @ +15°C ~ +35°C
Leakage Current
Capacitance Change
Tan δ
Soldering Effect
Solder Bath Temp.: +260 ± 5°C
Pre-heat: 120 ± 2 sec. to +120 ± 2°C
Leakage Current
Note: Please note NRLCW product series is specifically designed for use in commercial & consumer applications. For mission critical or industrial
applications, NIC recommends our NRLFW / NRLMW / NRLPW / NRLRW series products. Please consult NIC product specifications available on www.
niccomp.com. If in doubt, please contact NIC to review your requirements (appreview@niccomp.com)
MECHANICAL CHARACTERISTICS:
1. Safety Vent:
The capacitors are provided with a pressure sensitive safety vent on the top of can. The vent is designed to rupture in the event that high internal
gas pressure is developed by circuit malfunction or mis-use like reverse voltage.
2. Terminal Strength:
Each terminal of the capacitor shall withstand an axial pull force of 4.5Kg for a period 10 seconds or a radial bent force of 2.5Kg for a period
of 30 seconds.
Recommended PC Board Mounting Holes:
PART NUMBER SYSTEM
∅= 2 ± 0.1
NRLCW 221 M 400V 22X51 S F
Sleeve Color: Black
RoHS compliant
10 ± 0.5
PET Sleeve with Minus
Polarity Marking
Lead Length (S=4mm)
Case Size (mm)
Voltage Rating
Tolerance Code
Capacitance Code
Can Top Safety Vent
Approx.
3.0mm
D∅ ± 0.5
D+1
Max.
(-)
Chassis
(+)
Series
PC Board
L ± 2
4.0 ± 0.5
MAXIMUM EXPANSION FOR
SAFETY VENT
Notice for Mounting
The space from the top of the can shall be more than (3mm) from chassis or
other construction materials so that safety vent has room to expand in case
of emergency.
Please review the notes on correct use, safety and precautions found on
pages T10 & T11 of NIC’s Electrolytic Capacitor catalog.
Also found at www.niccomp.com/precautions
If in doubt or uncertainty, please review your specific application - process
details with NIC’s technical support personnel: tpmg@niccomp.com
NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
1
SPECIFICATIONS ARE SUBJECT TO CHANGE