NGTD17R120F2
Fast Switching Rectifier Die
Fast switching low Vf rectifier die for free−wheeling applications.
Features
• Fast Switching
• Low Vf
www.onsemi.com
Typical Applications
• Industrial Motor Control
• Solar PV Inverters
VRRM = 1200 V
IF = Limited by TJ(max)
MAXIMUM RATINGS
Parameter
Symbol
Value
1200
Unit
V
DIODE DIE
Peak Reverse Voltage
V
RRM
Max Forward Conduction Current
Maximum Junction Temperature
I
(Note 1)
175
A
F
T
°C
J
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
1. Depending on thermal properties of assembly.
MECHANICAL DATA
Parameter
Value
4000 x 4000
5.5
Unit
2
Die Size
mm
DIE OUTLINE
Die Thickness
mils
mm
Wafer Size
150
2
Top Pad Size (Anode)
Top Metal (Anode)
Back Metal (Cathode)
Max possible chips per wafer
Passivation frontside
Reject ink dot size
3380 x 3380
mm
4 mm AlSi
2 mm TiNiAg
769
Oxide−Nitride
25 mils
Recommended storage environment:
In original container, in dry nitrogen,
or temperature of 18−28°C,
30−65%RH
Type: Bare
Wafer in Jar
Storage time:
< 36 months
Type: Die on
tape in
ring−pack
Storage time:
< 3 months
ORDERING INFORMATION
Device
NGTD17R120F2WP
NGTD17R120F2SWK
Inking?
Shipping
Yes
Yes
Bare Wafer in Jar
Sawn Wafer on Tape
© Semiconductor Components Industries, LLC, 2016
1
Publication Order Number:
NGTD17R120F2WP/D
March, 2016 − Rev. 0