15W Output Switching Power Supply
NFM-15 series
Features :
Universal AC input / Full range
Protections: Short circuit / Over load / Over voltage / Over temperature
Ultra-miniature size, light weight
Cooling by free air convection
Isolation class
UL60601-1/IEC60601-1/EN60601-1 medical safety approved
No load power consumption<0.5W
100% full load burn-in test
Fixed switching frequency at 67KHz
High reliability
3 years warranty
EN60601-1
IEC60601-1
SPECIFICATION
MODEL
NFM-15-3.3
NFM-15-5
NFM-15-12
NFM-15-15
NFM-15-24
DC VOLTAGE
3.3V
5V
12V
15V
24V
RATED CURRENT
CURRENT RANGE
RATED POWER
3.5A
3A
1.25A
1A
0.63A
0 ~ 3.5A
11.55W
0 ~ 3A
15W
0 ~ 1.25A
15W
0 ~ 1A
15W
0 ~ 0.63A
15.12W
240mVp-p
21.6 ~ 26.4V
1.0%
RIPPLE & NOISE (max.) Note.2 80mVp-p
VOLTAGE ADJ. RANGE 3 ~ 3.63V
VOLTAGE TOLERANCE Note.3 2.0%
80mVp-p
4.5 ~ 5.5V
2.0%
150mVp-p
10.8 ~ 13.2V
1.0%
150mVp-p
13.5 ~ 16.5V
1.0%
OUTPUT
LINE REGULATION
LOAD REGULATION
SETUP, RISE TIME
HOLD UP TIME (Typ.)
1.0%
1.0%
0.5%
0.5%
0.5%
1.0%
1.0%
0.5%
0.5%
0.5%
1000ms, 20ms/230VAC
1000ms, 20ms/115VAC at full load
100ms/230VAC
85 ~ 264VAC
47 ~ 440Hz
73%
24ms/115VAC at full load
120 ~ 370VDC
VOLTAGE RANGE
FREQUENCY RANGE
EFFICIENCY (Typ.)
INPUT
76%
78%
79%
81%
0.35A/115VAC
0.2A/230VAC
AC CURRENT (Typ.)
INRUSH CURRENT (Typ.)
COLD START 30A/115VAC
50A/230VAC
Above 105% rated output power
OVERLOAD
Protection type : Hiccup mode, recovers automatically after fault condition is removed
13.8 ~ 16.2V 17.25 ~ 20.25V
27.6 ~ 32.4V
3.8 ~ 4.95V
5.75 ~ 6.75V
OVER VOLTAGE
PROTECTION
Protection type : Shut off o/p voltage, clamping by zener diode
Tj 140 typically (U1) detect on main control IC
OVER TEMPERATURE Note.5
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
-20 ~ +70 (Refer to output load derating curve)
20 ~ 90% RH non-condensing
WORKING TEMP.
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
-40 ~ +85 , 10 ~ 95% RH
ENVIRONMENT
0.03%/ (0 ~ 50
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
UL60950-1,UL60601-1,TUV EN60601-1, IEC60601-1 approved
I/P-O/P:4KVAC
SAFETY STANDARDS
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
EMI CONDUCTION & RADIATION
HARMONIC CURRENT
EMS IMMUNITY
SAFETY &
I/P-O/P:100M Ohms/500VDC
EMC
(Note 4)
Compliance to EN55011(CISPR11),EN55022 (CISPR22) Class B
Compliance to EN61000-3-2,-3
Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, EN60601-1-2, EN61204-3, medical level, criteria A
MTBF
499.7Khrs min. MIL-HDBK-217F (25
)
OTHERS
NOTE
DIMENSION
70*48*22mm (L*W*H)
0.065Kg; 120pcs/8.8Kg/0.97CUFT
PACKING
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
5. The over temperature protection (OTP) is the built-in function of the control IC (U1). The activating level described above is based on the specification
provided by the IC manufacturer.
File Name:NFM-15-SPEC 2007-09-19