NCV8855
Quad-Output Automotive
System Power Supply IC
with Integrated High-Side
2A Switch
http://onsemi.com
MARKING
The NCV8855 is a multiple output controller / regulator IC with an
integrated high−side load switch. The NCV8855 addresses automotive
radio system and instrument cluster power supply requirements. In
addition to the high−side load switch, the NCV8855 includes a
switch−mode power supply (SMPS) buck controller, a 2.5 A SMPS
buck regulator and two low dropout (LDO) linear regulator
controllers. The NCV8855 in combination with the ultra−low
quiescent current NCV861x IC forms an eight−output automotive
radio or instrument cluster power solution. The NCV8855 has an
internally set switching frequency of 170 kHz, with a SYNC pin for
external frequency synchronization.
The NCV8855 is intended to supply power to various loads, such as
a tuner, CD logic, audio processor and CD / tape control within a car
radio. The high−side switch can be used for a CD / tape mechanism or
switching an electrically−powered antenna or display unit. In an
instrument cluster application, the NCV8855 can be used to power
graphics display, flash memory and CAN transceivers. In addition, the
high−side switch can be used to limit power to a TFT display during a
battery over−voltage condition.
DIAGRAM
1
1
40
NCV8855
AWLYYWWG
40 PIN QFN, 6x6
MN SUFFIX
CASE 488AR
A
= Assembly Location
= Wafer Lot
= Year
= Work Week
= Pb−Free Package
WL
YY
WW
G
ORDERING INFORMATION
†
Device
Package
Shipping
NCV8855BMNR2G QFN−40
(Pb−Free)
2500 / Tape &
Reel
Features
• < 1 mA Shutdown Current
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
• Meets ES−XW7T−1A278−AB Test Pulse G – Loaded Conditions
• V Operating Range 9.0 to 18.0 V
IN
• 1 SMPS Controller with Adjustable Current Limit
• 1 SMPS Regulator with Internal 300 mW NMOS Switch
• 2 LDO Controllers with Current Limit and Short Circuit Protection
• 1 High−side Load Switch with Internal 300 mW NMOS FET
• Adjustable Output Voltage for All Controllers / Regulators
• 800 mV, $1% Reference Voltage
• System Enable Pin
• Single Enable Pin for Both LDO Controllers
• Independent Enable for High−side Load Switch
• Thermal Shutdown with Thermal Warning Indicator
• This is a Pb−Free Device
Applications
• Automotive Radio
• Instrument Cluster, Driver Information System (DIS)
© Semiconductor Components Industries, LLC, 2010
1
Publication Order Number:
May, 2010 − Rev. 1
NCV8855/D