NCV1009
2.5 Volt Reference
The NCV1009 is a precision trimmed 2.5 V ±5.0 mV shunt
regulator diode. The low dynamic impedance and wide operating
current range enhances its versatility. The tight reference tolerance is
achieved by on−chip trimming which minimizes voltage tolerance and
temperature drift.
A third terminal allows the reference voltage to be adjusted ±5.0%
to calibrate out system errors. In many applications, the NCV1009Z
can be used as a pin−to−pin replacement of the LT1009CZ and the
LM136Z−2.5 with the external trim network eliminated.
http://onsemi.com
SO−8
D SUFFIX
CASE 751
8
1
Features
• 0.2% Initial Tolerance Max.
PIN CONNECTIONS AND
MARKING DIAGRAM
• Guaranteed Temperature Stability
• Maximum 0.6 Ω Dynamic Impedance
• Wide Operating Current Range
• Directly Interchangeable with LT1009 and LM136 for Improved
Performance
1
8
NC
NC
NC
NC
NC
V
REF
• No Adjustments Needed for Minimum Temperature Coefficient
GND
ADJ. PIN
• Meets Mil Std 883C ESD Requirements
• Extended Operating Temperature Range for Use in Automotive
Applications
A
Y
WW
= Assembly Location
= Year
= Work Week
• NCV Prefix, for Automotive and Other Applications Requiring Site
and Change Control
ORDERING INFORMATION
†
Device
NCV1009D
NCV1009DR2
Package
Shipping
95 Units/Rail
SO−8
SO−8
2500 Tape & Reel
5.0 V−35 V
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
3.6 kΩ
V
REF
ADJ
10 kΩ
TRIM
GND
*±5.0% Trim Range
If the external trim resistor is not used, the “ADJ. PIN” should
be left floating. The 10k trim potentiometer does not effect the
temperature coefficient of the device.
Figure 1. Application Diagram
Semiconductor Components Industries, LLC, 2004
1
Publication Order Number:
August, 2004 − Rev. 6
NCV1009/D