NCV1060, NCV1063
Automotive High-Voltage
Switcher for Low Power
Offline SMPS
The NCV106X products integrate a fixed frequency current mode
controller with a 670 V MOSFET. Available in a SOIC−10 or
SOIC−16 package, the NCV106X offer a high level of integration,
including soft−start, frequency−jittering, short−circuit protection,
skip−cycle, adjustable peak current set point, ramp compensation, and a
Dynamic Self−Supply (eliminating the need for an auxiliary winding).
Unlike other monolithic solutions, the NCV106X is quiet by nature:
during nominal load operation, the part switches at one of the available
frequencies (60 kHz or 100 kHz). When the output power demand
diminishes, the IC automatically enters frequency foldback mode and
provides excellent efficiency at light loads. When the power demand
reduces further, it enters into a skip mode to reduce the standby
consumption down to a no load condition.
www.onsemi.com
MARKING DIAGRAMS
16
SOIC−16
NCV1063fyyyG
16
CASE 751B−05
AWLYWW
1
D SUFFIX
1
10
1
SOIC−10
CASE 751BQ
AD or BD SUFFIX
V1060fyyy
ALYWX
G
10
Protection features include: a timer to detect an overload or a
short−circuit event, Overvoltage Protection with auto−recovery and
AC input line voltage detection (A version).
1
The ON proprietary integrated Over Power Protection (OPP) lets
you harness the maximum delivered power without affecting your
standby performance simply via external resistors.
For improved standby performance, the connection of an auxiliary
winding stops the DSS operation and helps to reduce input power
consumption below 50 mW at high line.
x
f
= Power Switch Circuit
On−state Resistance
(0 = 34 W, 3 = 11.4 W)
= Brown In (A = Yes, B = No)
= Oscillator Frequency
yyy
(060 = 60 kHz, 100 = 100 kHz)
= Assembly Location
A
NCV106x can be seamlessly used both in non−isolated and in
isolated topologies.
L, WL = Wafer Lot
Y, YY = Year
W, WW = Work Week
G or G = Pb−Free Package
Features
• Built−in 670 V MOSFET with R
11.4 W (NCV1063)
of 34 W (NCV1060) and
DS(on)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 28 of this data sheet.
• Large Creepage Distance Between High−voltage Pins
• Current−Mode Fixed Frequency Operation – 60 kHz or 100 kHz
• Adjustable Peak Current: see below table
• Fixed Ramp Compensation
• Direct Feedback Connection for Non−isolated Converter
• Internal and Adjustable Over Power Protection (OPP) Circuit
• Skip−Cycle Operation at Low Peak Currents Only
• Dynamic Self−Supply: No Need for an Auxiliary Winding
• Frequency Foldback to Improve Efficiency
at Light Load
• NCV Prefix for Automotive and Other
Applications Requiring Unique Site and
Control Change Requirements; AEC−Q100
Qualified and PPAP Capable
• Internal 4 ms Soft−Start
• Auto−Recovery Output Short Circuit Protection with Timer−Based
Detection
• Auto−Recovery Overvoltage Protection with Auxiliary Winding
Operation
• These Devices are Pb−Free and are RoHS
Compliant
Typical Applications
• Frequency Jittering for Better EMI Signature
• No Load Input Consumption < 50 mW
• Auxiliary & Standby Isolated Power Sup-
plies for HEV/EV
© Semiconductor Components Industries, LLC, 2018
1
Publication Order Number:
May, 2018 − Rev. 0
NCV1060/D