NCP308, NCV308
Low Quiescent Current,
Programmable Delay Time,
Supervisory Circuit
The NCP308 series is one of the ON Semiconductor Supervisory
circuit IC families. It is optimized to monitor system voltages from
0.405 V to 5.5 V, asserting an active low open−drain RESET output,
together with Manual Reset (MR) Input. The part comes with both
fixed and externally adjustable versions.
www.onsemi.com
MARKING
DIAGRAMS
Features
TSOP−6
CASE 318G
• Wide Supply Voltage Range 1.6 to 5.5 V
• Very Low Quiescent Current 1.6 mA
• Fixed Threshold Voltage Versions for Standard Voltage Rails
Including 0.9 V, 1.2 V, 1.25 V, 1.5 V, 1.8 V, 1.9 V, 2.5 V, 2.8 V, 3.0 V,
3.3 V, 5.0 V
XXXAYWG
G
1
1
1
WDFN6
CASE 511BR
XX M
• Adjustable Version with Low Threshold Voltage 0.405 V (min)
• High Threshold Voltage Accuracy: 0.31% typ
• Support Manual Reset Input ( MR)
• Open−Drain RESET Output (Push−pull Output upon Request)
• Flexible Delay Time Programmability: 1.25 ms to 10 s
• Temperature Range: −40°C to +125°C
• Small TSOP−6 and WDFN6 2 x 2 mm, Pb−Free packages
• NCV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q100
Qualified and PPAP Capable
XXX, XX= Specific Device Code
A
Y
W
M
G
=Assembly Location
= Year
= Work Week
= Date Code
= Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
See detailed ordering and shipping information in the ordering
information section on page 9 of this data sheet.
• These are Pb−Free Devices
Typical Applications
• DSP or Microcontroller Applications
• Notebook/Desktop Computers
• PDAs/Hand−Held Products
• Portable/Battery−Powered Products
• FPGA/ASIC Applications
VIN
VDD
VIN
VDD
NCP308XXADJ
Rpullup
RESET
Rpullup
RESET
RESET
VDD
RESET
VDD
DSP/
Processor
DSP/
Processor
R1
R2
SENSE
MR
CT
SENSE
MR
CT
CT
(Optional)
CT
(Optional)
1 nF
MR
MR
(Optional)
GND
GND
Figure 1. Typical Application Circuit for Adjustable
Versions
Figure 2. Typical Application Circuit for Fixed
Versions
© Semiconductor Components Industries, LLC, 2014
1
Publication Order Number:
December, 2014 − Rev. 6
NCP308/D