NCP1247
Fixed Frequency Current
Mode Controller for Flyback
Converters
The NCP1247 is a new fixed−frequency current−mode controller
featuring the Dynamic Self−Supply. This function greatly simplifies
http://onsemi.com
MARKING
the design of the auxiliary supply and the V capacitor by activating
CC
the internal startup current source to supply the controller during
start−up, transients, latch, stand−by etc. This device contains a special
HV detector which detect the application unplug from the AC input
line and triggers the X2 discharge current. This HV structure allows
the brown−out detection as well.
It features a timer−based fault detection that ensures the detection of
overload and an adjustable compensation to help keep the maximum
power independent of the input voltage.
Due to frequency foldback, the controller exhibits excellent
efficiency in light load condition while still achieving very low
standby power consumption. Internal frequency jittering, ramp
compensation, and a versatile latch input make this controller an
excellent candidate for the robust power supply designs.
A dedicated Off mode allows to reach the extremely low no load
input power consumption via “sleeping” whole device and thus
minimize the power consumption of the control circuitry.
DIAGRAM
8
47Xff
ALYWX
G
SOIC−7
CASE 751U
1
47Xff = Specific Device Code
X = A, B, C or D
ff = 65 or 100
= Assembly Location
= Wafer Lot
= Year
= Work Week
= Pb−Free Package
A
L
Y
W
G
PIN CONNECTIONS
Features
Latch
FB
1
2
3
4
8
HV
• Fixed−Frequency Current−Mode Operation (65 kHz and 100 kHz
frequency options)
• Frequency Foldback then Skip Mode for Maximized Performance in
Light Load and Standby Conditions
V
CC
6
5
CS
GND
DRV
(Top View)
• Timer−Based Overload Protection with Latched (Options A/C) or
Auto−Recovery (Options B/D) Operation
• High−voltage Current Source with Brown−Out Detection and
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 41 of this data sheet.
Dynamic Self−Supply, Simplifying the Design of the V Circuitry
CC
• Frequency Modulation for Softened EMI Signature
• Adjustable Overpower Protection Dependant on the Bulk Voltage
• Latch−off Input Combined with the Overpower Protection Sensing
Input
• V Operation up to 28 V, With Overvoltage Detection
CC
Typical Applications
• 500/800 mA Source/Sink Drive Peak Current
Capability
• AC−DC Adapters for Notebooks, LCD, and Printers
• Offline Battery Chargers
• Consumer Electronic Power Supplies
• Auxiliary/Housekeeping Power Supplies
• Offline Adapters for Notebooks
• 10 ms Soft−Start
• Internal Thermal Shutdown
• No−Load Standby Power < 30 mW
• X2 Capacitor in EMI Filter Discharging Feature
• These Devices are Pb−Free and Halogen Free/BFR Free
© Semiconductor Components Industries, LLC, 2013
1
Publication Order Number:
October, 2013 − Rev. 0
NCP1247/D