NB7NPQ7022M
3.3 V USB 3.1 Dual Channel
High Gain Linear Redriver
Description
The NB7NPQ7022M is a 3.3 V dual channel, high gain, redriver for
USB 3.1 Gen 1 and USB 3.1 Gen 2 applications that supports both
5 Gbps and 10 Gbps data rates. Signal integrity degrades from PCB
traces, transmission cables, and inter−symbol interference (ISI). The
NB7NPQ7022M compensates for these losses by engaging varying
levels of equalization at the input receiver, and flat gain amplification
on the output transmitter. The Flat Gain and Equalization are
controlled by four level control pins. Each channel has a set of
independent control pins to make signal optimization possible.
After power up, periodic check of TX output is made for the receiver
connection. When the receiver is detected, the RX termination
becomes enabled and the device is set to perform the redriver function.
Note that both channels are independent of each other.
www.onsemi.com
1
UQFN16
CASE 523AF
The NB7NPQ7022M comes in a small 3 x 3 mm UQFN16 package
and is specified to operate across the entire industrial temperature
range of –40°C to 85°C.
Features
• 3.3 V ± 0.3 V Power Supply
MARKING DIAGRAM
NB7N
7022
ALYWG
G
• Low Power Consumption: 114 mA in Active Mode
• Supports USB 3.1 Gen 1 and USB 3.1 Gen 2 Data Rates
• Automatic Receiver Termination Detection
• Integrated Input and Output Termination
• Independent, Selectable Equalization and Flat Gain
• Hot−Plug Capable
NB7N7022 = Specific Device Code
A
L
Y
W
G
= Assembly Location
= Wafer Lot
= Year
= Work Week
= Pb−Free Package
(Note: Microdot may be in either location)
• Operating Temperature Range: −40°C to +85°C
• Small 3 x 3 x 0.5 mm UQFN16 Package, Flow Through Design for
Ease of PCB Layout
ORDERING INFORMATION
• This is a Pb−Free Device
Typical Applications
• USB3.1 Type−C and Type−A Signal Routing
• Mobile Phone and Tablet
• Computer, Laptop and Notebook
• External Storage Device
†
Device
NB7NPQ7022MMUTXG UQFN16 3000 / Tape
(Pb−Free) & Reel
Package
Shipping
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
• Docking Station and Dongle
• Active Cable, Back Planes
• Gaming Console, Smart T.V.
© Semiconductor Components Industries, LLC, 2018
1
Publication Order Number:
July, 2018 − Rev. 0
NB7NPQ7022M/D