NB7NPQ7041M
3.3 V USB 3.1 Quad
Channel / Dual Port Linear
Redriver
Description
The NB7NPQ7041M is a 3.3 V quad channel / dual port linear
redriver suitable for USB 3.1 Gen 1 and USB 3.1 Gen 2 applications
that supports both 5 Gbps and 10 Gbps data rates. Signal integrity
degrades from PCB traces, transmission cables, and inter−symbol
interference (ISI). The NB7NPQ7041M compensates for these losses
by engaging varying levels of equalization at the input receiver, and flat
gain amplification on the output transmitter. The Flat Gain and
Equalization are controlled by four level control pins. Each channel has
a set of independent control pins to make signal optimization possible.
After power up, the NB7NPQ7041M periodically checks both of the
TX output pairs of each port for a receiver connection. When the receiver
is detected on both channels, the RX termination becomes enabled of
that respective port and is set to perform the redriver function.
The port becomes active once both TX outputs have detected
50−ohm termination, and the NB7NPQ7041M is set to perform the
redriver function. Port AB (channels A & B) and port CD (channels C
& D) are independent of each other.
www.onsemi.com
MARKING
DIAGRAM
7NPQ
7041
ALYWG
G
1
X2QFN34
CASE 722AL
7NPQ7041 = Specific Device Code
A
L
Y
W
G
= Assembly Location
= Wafer Lot
= Year
= Work Week
= Pb−Free Package
(Note: Microdot may be in either location)
The NB7NPQ7041M comes in a small 3.1 x 4.3 mm X2QFN34
package and is specified to operate across the entire industrial
temperature range, –40°C to 85°C.
ORDERING INFORMATION
†
Device
Package Shipping
Features
• 3.3 V 5% Power Supply
NB7NPQ7041MMUTWG X2QFN34
3000 /
(Pb−Free) Tape & Reel
• Supports USB 3.1 Gen 1 and USB 3.1 Gen 2 Data Rates
• Automatic Receiver Termination Detection
• Integrated Input and Output Termination
• Independent, Selectable Equalization and Flat Gain
• Hot−Plug Capable
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
• Flow−through Design for Ease of PCB Layout
• ESD Protection: 4 kV HBM
• Operating Temperature Range: −40°C to 85°C
• Small 3.1 x 4.3 x 0.35 mm X2QFN34 Package
• This is a Pb−Free Device
Typical Applications
• USB3.1 Type−C and Type−A Signal Routing
• Mobile Phone and Tablet
• Computer and Laptop
• Docking Station and Dongle
• Active Cable, Back Planes
• Gaming Console, Smart T.V., Set−Top Boxes
© Semiconductor Components Industries, LLC, 2017
1
Publication Order Number:
January, 2018 − Rev. 1
NB7NPQ7041M/D