®
8XC196MH INDUSTRIAL MOTOR CONTROL
CHMOS MICROCONTROLLER
■ High Performance CHMOS 16-bit CPU
■ 16 MHz Operating Frequency
■ Event Processor Array (EPA) with 2 High-
speed Capture/Compare Modules and 4 High-
speed Compare-only Modules
■ 32 Kbytes of On-chip OTPROM/ROM
■ 744 Bytes of On-chip Register RAM
■ Register-to-register Architecture
■ 16 Prioritized Interrupt Sources
■ Two Programmable 16-bit Timers with
Quadrature Counting Inputs
■ Two Pulse-width Modulator (PWM) Outputs
with High Drive Capability
■ Flexible 8- or 16-bit External Bus
■ Peripheral Transaction Server (PTS) with 15
×
Prioritized Sources
■ 1.75 µs 16 16 Multiply
■ Up to 52 I/O Lines
■ 3 µs 32/16 Divide
■ 3-phase Complementary Waveform Generator
■ Extended Temperature Available
■ Idle and Powerdown Modes
■ Watchdog Timer
■ 8-channel 8- or 10-bit A/D with Sample and
Hold
■ 2-channel UART
®
The 8XC196MH is a member of Intel’s family of 16-bit MCS 96 microcontrollers. It is designed primarily to
control three-phase AC induction and DC brushless motors. It features an enhanced three-phase waveform
generator specifically designed for use in “inverter” motor-control applications. This peripheral provides pulse-
width modulation and three-phase sine wave generation with minimal CPU intervention. It generates three
complementary non-overlapping PWM pulses with resolutions of 0.125 µs (edge triggered) or 0.250 µs
(centered).
The 8XC196MH has two dedicated serial port peripherals, allowing less software overhead. The watchdog timer
can be programmed with one of four time options.
The 8XC196MH is available as the 80C196MH, which does not have on-chip ROM, the 87C196MH,
which contains 32 Kbytes of on-chip OTPROM* or factory programmed ROM, and the 83C196MH, which
contains 32 Kbytes of factory programmed MASK ROM. It is available in 84-lead PLCC, 80-lead Shrink EIAJ/QFP,
and 64-lead SDIP. The 64-lead package does not contain pins for the P5.1/INST and P6.7/PWM1 signals.
Operational characteristics are guaranteed over the temperature range of – 40°C to + 85°C.
*One-Time Programmable Read-Only Memory (OTPROM) is similar to EPROM but comes in an unwindowed package and
cannot be erased. It is user programmable.
Intel Corporation assumes no responsibility for the use of any circuitry other than circuitry embodied in an Intel product. No other circuit patent
licenses are implied. Information contained herein supersedes previously published specifications on these devices from Intel.
© INTEL CORPORATION, 2004
August 2004
Order Number: 272543-003