3M™ Four-Wall Header
.100” × .100” Latch/Ejector, Straight and RightAngle
3000 Series
•ꢀ Military (with 3M’s 3518 & N3518 polarizing key)
and centerbump polarization
•ꢀ Optional ejector latches
•ꢀ Mounting holes for securing header to board
•ꢀ Optional polarizing posts available
•ꢀ High temperature insulator option suitable for “no
lead” soldering operations
•ꢀ High temperature option suitable for reflow soldering
using “paste in hole” techniques
•ꢀ Solder tail option
•ꢀ See Regulatory InformationAppendix for chemical
compliance information
Date Modified: December 3, 2008
TS-0772-H
Sheet 1 of 4
Physical
Insulator:
Material: Glass Filled Polyester (PBT) Glass Filled Polyester (PCT) - (High Temp Option)
Flammability: UL 94V-0
Color: Gray (PBT), Beige (PCT), Black (PCT)
Contact:
Material: CopperAlloy
Plating:
Underplating:
Nickel - Overall (See Ordering Information)
WipingArea: 30 µ” [ 0.76 µm ] Gold
Solder Tails: Tin Lead or Matte Tin (See Ordering Information)
3M Logo, Part Identification Number and Orientation Triangle
Marking:
Electrical
2A (EIA 364-70)
Current Rating:
Insulation Resistance:
Withstanding Voltage:
>1 × 109 Ω at 500VDC
1000VRMS at Sea Level
Environmental
-55°C to +105°C
Temperature Rating:
260°C - (High Temp PCT insulator verson), single pass, (profile per J-STD-020C)
(PBT insulator version), maximum insulator temperature 191°C (solder wave
processonly)
Process Rating:
1 (per J-STD-020C) High Temp. (PCT) versions only
Moisture Sensitivity Level:
UL File No.: E68080
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/