P5KE5.0 thru P5KE170CA, e3
500 W TRANSIENT VOLTAGE
SUPPRESSOR
S C O T T S D A L E D I V I S I O N
DESCRIPTION
APPEARANCE
This P5KE series is an economical 500 W Transient Voltage Suppressor
(TVS) for protecting voltage-sensitive components from destruction or
DO-41
(DO-204AL)
degradation.
It is available in both unidirectional and bi-directional
configurations as well as RoHS Compliant (annealed matte-Tin Finish) with
an e3 suffix added to the part number. The response time of their clamping
action is virtually instantaneous. As a result, they may also be used
effectively for protection from ESD or EFT per IEC61000-4-2 and IEC61000-
4-4 or for inductive switching environments and induced RF. They can also
be used for protecting other sensitive components from secondary lightning
effects per IEC61000-4-5 and class levels defined herein. Microsemi also
offers numerous other TVS products to meet higher and lower power
demands and special applications.
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
FEATURES
APPLICATIONS / BENEFITS
•
Available in both unidirectional and bidirectional
(add C or CA suffix to part number for bidirectional)
Suppresses transients up to 500 watts @ 10/1000 µs
•
Protects sensitive components such as IC’s,
CMOS, Bipolar, BiCMOS, ECL, DTL, T2L, etc.
•
•
•
•
•
•
Selections for 5.0 to 170 V standoff voltage (VWM
Economical series for thru-hole mounting
Similar to SA5.0 thru SA170 series
)
•
•
Optional 100% screening for avionics grade is
available by adding MA prefix to part number for added
100% temperature cycle -55oC to +125oC (10X) as well
as surge (3X) and 24 hours HTRB with post test VZ &
IR (in the operating direction for unidirectional or both
directions for bidirectional)
Protection from switching transients & induced RF
Fast response
Compliant to IEC61000-4-2 and IEC61000-4-4 for
ESD and EFT protection respectively
•
•
Options for screening in accordance with MIL-PRF-
19500 for JAN, JANTX, JANTXV, and JANS are also
available by adding MQ, MX, MV, or MSP prefixes
respectively to part numbers.
•
Secondary lightning protection per IEC61000-4-5
with 42 Ohms source impedance:
Class 1: P5KE5.0 to P5KE120A or CA
Class 2: P5KE5.0 to P5KE60A or CA
Class 3: P5KE5.0 to P5KE30A or CA
Class 4: P5KE5.0 to P5KE15A or CA
Surface mount equivalents available as SMAJ5.0 to
SMAJ170CA (consult factory for other surface mount
options)
•
•
Moisture classification is Level 1 with no dry pack
required per IPC/JEDEC J-STD-020B
•
Secondary lightning protection per IEC61000-4-5
with 12 Ohms source impedance:
RoHS Compliant devices available by adding “e3” suffix
Class 1: P5KE5.0 to P5KE36A or CA
Class 2: P5KE5.0 to P5KE18A or CA
MAXIMUM RATINGS
MECHANICAL AND PACKAGING
• Operating and Storage Temperature: -65°C to +150°C
•
•
Void-free transfer molded thermosetting epoxy body
meeting UL94V-0
• Peak Pulse Power: 500 Watts at 10/1000 μs (see Figure
FINISH: Tin-Lead or RoHS Compliant annealed
matte-Tin plating readily solderable per MIL-STD-
750, method 2026
1, 2 and 3 for tW, waveform and derating effects)
• Impulse repetition rate (duty factor): 0.01%
• Thermal Resistance: 45°C/W junction to leads @ 3/8
inch (10 mm) from body, or 105°C/W junction to ambient
when mounted on FR4 PC board with 4 mm2 copper
pads (1 oz) and track width 1 mm, length 25 mm
•
•
MARKING: Body marked with part number
POLARITY: Band denotes cathode. Bidirectional
not marked
•
•
WEIGHT: 0.3 grams (approximate)
• Steady-State Power: 2.77 Watts @ TL=25°C at 3/8 inch
(10 mm) from body, or 1.19 W at TA = 25ºC on FR4 PC
board described for thermal resistance
TAPE & REEL option: Standard per EIA-296 (add
“TR” suffix to part number)
• Forward Voltage at 25°C: 3.5 V @ 30 A with 8.3 ms
•
See package dimensions on last page
half-sine wave (unidirectional only)
• Solder temperatures: 260 °C for 10 s (maximum)
Copyright © 2005
8-04-2005 REV D
Microsemi
Page 1
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503