MX29LA129M H/L
128M-BIT SINGLE VOLTAGE 3V ONLY
UNIFORM SECTOR FLASH MEMORY
FEATURES
GENERAL FEATURES
• Status Reply
• Single Power Supply Operation
- 2.7 to 3.6 volt for read, erase, and program opera-
tions
- Data# polling & Toggle bits provide detection of pro-
gram and erase operation completion
• Configuration
- 16,777,216 x 8 / 8,388,608 x 16 switchable
• Sector structure
HARDWARE FEATURES
• Ready/Busy (RY/BY#) Output
- Provides a hardware method of detecting program
and erase operation completion
- 64KB(32KW) x 256
• Latch-up protected to 250mA from -1V to VCC + 1V
• Low VCC write inhibit is equal to or less than 1.5V
• Compatible with JEDEC standard
- Pin-out and software compatible to single power sup-
ply Flash
• Hardware Reset (RESET#) Input
- Provides a hardware method to reset the internal
state machine to read mode
• WP#/ACC input
- Write protect (WP#) function allows protection of all
sectors, regardless of sector protection settings
- ACC (high voltage) accelerates programming time
for higher throughput during system
PERFORMANCE
• High Performance
- Fast access time: 90R/100ns
- Page read time:25ns
SECURITY
- Sector erase time: 0.5s (typ.)
- 4 word/8 byte page read buffer
- 16 word/ 32 byte write buffer:reduces programming
time for multiple-word/byte updates
• Low Power Consumption
• Sector Protection/Chip Unprotect
- Provides sector group protect function to prevent pro-
gram or erase operation in the protected sector group
- Provides chip unprotect function to allow code
changes
- Active read current: 18mA(typ.)
- Active write current: 20mA(typ.)
- Standby current: 20uA(typ.)
• Minimum 100,000 erase/program cycle
• 20-years data retention
- Provides temporary sector group unprotect function
for code changes in previously protected sector groups
• Sector Permanent Lock
- A unique lock bit feature allows the content to be
permanently locked
(Please contact Macronix sales for specific infor-
mation regarding this permanent lock feature)
• Secured Silicon Sector
SOFTWARE FEATURES
• Support Common Flash Interface (CFI)
- Flash device parameters stored on the device and
provide the host system to access.
• Program Suspend/Program Resume
- Suspend program operation to read other sectors
• Erase Suspend/ Erase Resume
- Provides a 128-word OTP area for permanent, se-
cure identification
- Can be programmed and locked at factory or by cus-
tomer
- Suspends sector erase operation to read data/pro-
gram other sectors
PACKAGE
• 56-pinTSOP
GENERAL DESCRIPTION
The MX29LA129M H/L is a 128-mega bit Flash memory
organized as 16M bytes of 8 bits or 8M words of 16 bits.
MXIC's Flash memories offer the most cost-effective and
reliable read/write non-volatile random access memory.
The MX29LA129M H/L is packaged in 56-pinTSOP. It is
designed to be reprogrammed and erased in system or in
standard EPROM programmers.
The standard MX29LA129M H/L offers access time as
fast as 90ns, allowing operation of high-speed micropro-
cessors without wait states. To eliminate bus conten-
tion, the MX29LA129M H/L has separate chip enable
(CEx) and output enable (OE#) controls.
MXIC's Flash memories augment EPROM functionality
P/N:PM1171
REV. 1.0, FEB. 27, 2006
1