MTH Series – 5 x 3.2 Ceramic SMD Oscillator
¾ Low Profile SMD Package
¾ Hermetically Sealed
¾ Stand-by Available
¾ Wide Frequency Range
ELECTRICAL SPECIFICATIONS:
Frequency Range
1.544MHZ to 133.000MHZ
Temperature Stability*
Aging (+25°C ±3°C)
(See Part Number Guide for Options)
±5ppm for first year
Operating Temperature Range
Storage Temperature Range
Supply Voltage (±10%)
(See Part Number Guide for Options)
-55°C to +125°C
+1.80 VDC
6mA
7mA
15mA
25mA
+2.50 VDC
7mA
+3.30 VDC
8mA
+5.00 VDC
15mA
20mA
35mA
40mA
1.544MHZ to 9.999MHZ
10.000MHZ to 35.999MHZ
35.000MHZ to 49.999MHZ
50.000MHZ to 133.000MHZ
8mA
10mA
Supply Current
20mA
30mA
25mA
35mA
Output Type
Symmetry (50% of waveform)
Rise/Fall Time (10% to 90% of Supply Voltage)
HCMOS
40%/60% (45%/55% option)
6nSec max 7nSec max
5nSec max
5nSec max
Load
15pF
Start-up Time
10mSec max
* Inclusive of Temperature., Load, Voltage and Aging
Pin 1 Function
Vih = 70% of Vdd min to Enable Output
Vil = 30% max or grounded to Disable Output (High Impedance)
Tri-state Operation
Standby Current
10µA max
MECHANICAL DIMENSIONS:
1.60 [.063]
MAX
5.20 [.205]
MAX
2.54 [.100]
2.54 [.100]
2.20 [.087]
PIN CONNECTIONS
TRI-STATE OR
STANDBY
3
2
4
1
PIN 1
1.10 [.043]
3.40 [.134]
MAX
1.20 [.047]
1.20 [.047]
PIN 2
PIN 3
PIN 4
CASE GROUND
OUTPUT
SUPPLY VOLTAGE
1.40 [.055]
DIMENSIONS IN BRACKETS ARE IN INCHES
EXTERNAL BYPASS CAPACITOR IS RECOMMENDED
RECOMMENDED
LAND PATTERN
PART NUMBER GUIDE:
Frequency
MTH
H
Pin 1 Connection
H = Tri-state
S = Standby
5 x 3.2 Ceramic SMD 4 Pads
Symmetry
Blank = 40/60%
A = 45/55%
Frequency
Stability
Supply Voltage
Operating Temperature
5 = +5.0VDC
025 = ±25 ppm
050 = ±50 ppm
100 = ±100 ppm
3 = +3.3VDC
2 = +2.5VDC
1 = +1.8VDC
Value Added Options
Blank = No Added Options
T = Tape and Reel
Blank = 0°C to +70°C
27 = -20°C to +70°C
48 = -40°C to +85°C
Please Consult with MMD Sales Department for any other Parameters or Options
MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688
Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com
Sales@mmdcomp.com
Specifications subject to change without notice
Revision 03/01/07 I